Allied Telesis CAM Quick Install Manual

Document Number C613-04037-01 REV E. © 2003-2007 Allied Telesis, Inc. All rights reserved. No part of this publication may be reproduced without prior written permission from Allied Telesis, Inc. Allied Telesis, Inc. reserves the right to make changes in specifications and other information in this document without prior written noti ...

3 C613-04037-01 REV E Models Covered By This Guide This Quick Install Guide contains information on installing the LineCAM Content Addressable Memory (CAM) extender cards. Package Contents The following items are included with each CAM extender card. Contact your sales representative if any items are damaged or missing. ■ One CAM extend ...

C613-04037-01 REV E 6. Remove the switch’s lid. The switch may need to be removed from any rack mounting system before its lid can be removed. Using a posidrive screwdriver, remove the 12 screws that secure the switch’s lid. There are 5 screws located in countersunk holes on each side of the lid, and 2 screws at the rea ...

5 C613-04037-01 REV E Testing the CAM Extender Card To check the switch has recognised the CAM card, turn on the switch and enter the command: show switch to display system information, including the amount of CAM installed. If there is no entry for the CAM, or the entry displays an unexpected value, then the switch has not correctly dete ...