Allied Telesis AlliedWare Plus Overview

Text of the manual

C613-16120-00 REV A

www.alliedtelesis.com AlliedWare PlusTM OS Overview of | Introduction This How To Note describes the main features of QoS on switches running the AlliedWare Plus OS. The main features include: z Prioritisation and marking Right at the point of ingress into the QoS process, packets classified to particular class maps can have values writte

Page 2 | AlliedWare Plus™ OS: Overview of QoS

z Ability to see the current state of egress queues There are commands that enable you to see statistics relating to every egress queue on every port. Each of these features is discussed in much more detail later on in this document. Contents Introduction ........................................................

Page 3 | AlliedWare Plus™ OS: Overview of QoS

Which products and software version does this Note apply to? z Products: SwitchBlade x908, x900-12XT/S, and x900-24 series switches z Software versions: AlliedWare Plus version 5.2.1-0.1 and above The process flow and methodology of the QoS system Before discussing the details of the various processes that comp

Page 4 | AlliedWare Plus™ OS: Overview of QoS

Packet markers There are four items that are used to mark packets as they pass through the QoS system. z Two markers that are carried within fields of the packet itself: z 802.1p: The 802.1p or User Priority field in the VLAN tag of an Ethernet frame. This is a 3-bit number, so it can have a value in the range

Page 5 | AlliedWare Plus™ OS: Overview of QoS

Outline of the QoS processing flow Let's look at each QoS process in the order that they are applied to a packet. The following figure gives a quick view of the QoS features we are about to discuss. Initial mapping to an egress queue, based on 802.1p value Immediately after ingress, a VLAN-tagged Ethernet frame

Page 6 | AlliedWare Plus™ OS: Overview of QoS

Classification Classification is simply a method of dividing the incoming traffic into traffic flows so that packets of one type can be treated differently to packets of another type. To do this, you create class maps and if desired ACLs. Incoming packets are inspected and may be classified on a very broad rang

Page 7 | AlliedWare Plus™ OS: Overview of QoS

Policing Policing involves measuring the bandwidth used by a policer and comparing the measurement to the bandwidth limits that have been set for the policer. The policing process allocates a temporary bandwidth class value to packets. It is important to note that the policing process does not overwrite the ban

Page 8 | AlliedWare Plus™ OS: Overview of QoS

Queue shaping Each egress port has eight egress queues, which are numbered 0-7 with 7 being the highest priority queue. Unfortunately, the queues are of a limited length, so packets cannot be added to them indefinitely; if the switch is congested, the queues may fill up and no more packets can be added. In this

Other Switch Manuals