NUUO NAS NVRmini Quick Start Manual

English .............................................................................................................. 2 Čeština ........................................................................................................... 12 Deutsch .......................................................................................... ...

This package contains the following items:  The unit  Quick Start Guide  Screws for disk drives (1 package)  Power cord  Warranty card  12V DC power transformer (2 bay unit)  CD with Install Wizard, Backup, Live View, and Playback application, user manual, and quick start guide Warning The electronic componen ...

4 bay unit front view Disk Drive Drive Carrier Drive Status LED Drive Activity LED Ethernet Activity LED Power Button System Status LED Cooling Fan USB Connection RJ45 Network Connection Power Connection ...

4 bay unit front view (S-series) Cooling Fan RJ45 Network Connection USB Connections Power Supply Fan Power Connection English Disk Drive Drive Carrier Drive Status LED Drive Activity LED System Status LED Ethernet Activity LED ...

Step 2: Installing Disk Drives You can populate this unit with SATA 1.5 Gb/s or 3.0 Gb/s disk drives. For optimal performance, install disk drives of the same model and capacity. Your disk drives will become a RAID Volume on this unit. 1. Open the lid on the front of the unit enclosure. 2. Pull a disk drive carrier from the ...

1. Attach one end of the network cable to the RJ45 network connection. See the rear view figure. 2. Attach the other end of the network cable to your Ethernet hub or switch. Important If there are multiple networks at your facility, note the network to which you connect the unit. You will need this information during the s ...

click the Next button. 5. Insert your “User Name” and “Company Name”, and then click the Next button. 6. Select the setup type, and then click the Next button. 7. Click the Install button to proceed with installation. 8. When the above-mentioned installation processes a ...

Note The default Administrator password is “admin”. 6. Set the time zone, date, and time, and then click the Next button. English ...

 Obtain network settings automatically from DHCP server or wizard: apply all settings which are automatically generated by the DHCP server, such as IP, netmask, gateway, and DNS.  Make network settings manually: select your preferred settings one by one. 8. If you need to set a new disk( ...