Panasonic DMWFL500 - EXTERNAL FLASH-MULTI LANGUAGE Operating Instructions Manual

Text of the manual

Instrucciones de funcionamiento

Flash Model No.DMW-FL500 Before use, please read these instructions completely. Bitte lesen Sie diese Bedienungsanleitung vor der Inbetriebnahme des Gerätes vollständig durch. Avant l’utilisation, veuillez lire entièrement ces instructions. Antes

Information for Your Safety ..................................................................................................................... 3

Precautions......................................................................................................................................... 4 Supplied accessories......................

Information for Your

Safety ≥ This flash is designed to be used with digital cameras made by Panasonic. It is compatible with DMC-L1K (with communication functions: P13 to 19 ), DMC-FZ30 etc. (without communication functions: P20 to 23 ). (as of July 2006) ≥ The explanations in these operating instructions describe DMC-L1K as an example. ≥ Fo

∫ Concerning the unit’s handling

≥ Do not subject the unit to strong vibration or impact. Doing so may cause not only the unit to malfunction but also the flash head to break. ≥ Before carrying the unit around with you, ensure that the wide panel is properly retracted. (P26) ≥ Sand and dirt may cause the unit to malfunction. When using th

Names of the

Components 1 Wide panel (P26) 2 Flash head 3 AF assist lamp (P29) ≥ In dark locations where it is difficult to bring the subject into focus, you can direct light onto the subject to facilitate focusing. (The AF assist works only when this flash is used in combination with Panasonic’s “Four ThirdsTM” digital single-lens reflex c

Displays Appearing on the Display Panel

1 Wide panel display (P26) 2 FP firing (P17, 18 ) 3 Flash mode (P13, 20 ) 4 Zoom value (P25) 5 Flash intensity adjustment (P19) 6 Distance display (P29) 7 Aperture 8 Setting displays (guide number, ISO sensitivity, aperture, flash working range, correct distance, flash intensity adjustment) 9 ISO sensitivity

Concerning the batteries

∫ Types of batteries that can be used ≥ The use of batteries made by Panasonic is recommended. ≥ The performance of the batteries used may significantly differ depending on which battery brand is used, how long the batteries have been stored since they were manufactured and how they have been stored. ≥ The performan

∫ Handling the batteries

Mishandling of batteries may cause electrolyte leakage, heat generation and even rupturing of the batteries themselves. Heed with the following cautions. ≥ Do not expose batteries to water or seawater or allow their terminal areas to become wet. ≥ Do not remove their external jackets or damage them in any way. ≥ Do

∫ Rechargeable nickel metal hydride

batteries Nickel metal hydride batteries can be made ready for use by recharging them using a dedicated charger. However, mishandling may cause electrolyte leakage, heat generation, the ignition of flames and even rupturing of the batteries themselves. Heed the following precautions. Nickel metal hydride batter

Inserting and Removing

the Unit’s Batteries (optional) ≥ Check that the unit’s power is off. ≥ Use alkaline dry batteries or rechargeable nickel metal hydride batteries. 1 Slide the battery cover to open it. ≥ There is tape adhered to the battery cover the first time that you use the unit. Peel it off. 2 When inserting the batteries, ens

Other Flashlight Manuals