Allied Telesis AT-3726XL Installation Manual

960 Srewart Drive Suite B, Sunnyvale CA 94086 USA All rights reserved. No part of this publication may be reproduced without prior written permission from Allied Telesyn International, Corp. CentreCom is a registered trademark of Allied Telesyn International, Corp. All other product names, company names, logos or other designations mentioned herein are trademarks or registered trademarks of their ...

Requirements For AT-3726XL and AT-3716XL Standards: This product meets the following standards RFI Emission EN55022 Class A " 1a Immunity EN50082-1 " 2 U.S. Federal Communications Commission Radiated Energy Note: This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful ...

iv For AT-3714FXL Standards: This product meets the following standards. RFI Emission EN55022 Class B " 1b Immunity EN50082-1 " 2 Declaration Of Conformity Manufacturers Name: Allied Teleysn International, Corp. Manufacturers Address: 960 Stewart Drive, Suite B Sunnyvale, CA 94086 USA Manufacturers Telephone: 408-730-095 Declares that the product: Fiber Ethernet Switch Model Number: AT-3714FXL This product co ...

adequate measures. " 3 IMPORTANT: Appendix A contains translated safety statements for installing this equipment. When you see the ", go to Appendix A for the translated safety statement in your language. WICHTIG: Anhang A enthält übersetzte Sicherheitshinweise für die Installation dieses Geräts. Wenn Sie " sehen ...

Electrical Safety and Installation Requirements .......................................................................................................................iii For AT-3726XL and AT-3716XL ........................................................................................................................................................................iii For AT-3714FXL .................................................... ...

viii Chapter 3 Troubleshooting ...........................................................................................................................................................................................3-1 At the First Sign of a Problem ........................................................................................................................................................................3-1 Network Cabling P ...

This guide is written for installers and network administrators who are responsible for installing and maintaining the switch. How This Guide is Organized This guide consists of the following sections: Chapter 1, Product Description, describes the features and functions of the switch. Chapter 2, Installing the Switch, describes the procedures for installing the switch. Chapter 3, Troubleshooting, describes how to tro ...

Note A note provides additional information. Warning A warning indicates that performing or omitting a specific action may result in bodily injury. Caution A caution indicates that performing or omitting a specific action may result in equipment damage or loss of data. When you see the ", go to Appendix A for the translated safety statement in your language. Related ...

switches that provides 24 or 14 10Base-T ports and one built-in 10/100Base-TX port. All ports capable of full- or half-duplex with auto-negotiation or manual configuration on all ports. The AT-3714FXL provides 12 10Base-FL ports with one built-in 100Base-FX (SC). All ports manually configurable for half- or full- duplex. All switches include a 100Base slot that ...

3701 100BASE-TX X MDA B 100BASE-FX MIRROR PORT RS-232 TERMINAL PORT STATUS RESET 10BASE-FL PORT ACTIVITY 1 3 5 7 9 11 2 A B 4 6 8 10 12 1 3 5 7 9 11 2 4 6 8 10 12 A LINK LINK ACTIVITY FAULT POWER X 10BASE-FL ETHERNET SWITCH with FAST ETHERNET 100BASE ACCESS TX RX TX RX TX RX TX RX TX RX TX RX TX RX AT-3726XL AT-3716XL AT-3714FXL (ST) MDA B 100BASE-FX MIRROR PORT RS-23 ...

1-3 Physical Description The switches have the following major front panel components: # 24 or 14 Ethernet 10Base-T RJ45 ports (AT-3726XL, AT-3716XL); 12 Ethernet 10Base-FL (SC/ST) ports (AT-3714FXL) # Optional MDA - 100Base-X port can be configured either with 10/100Base-TX (RJ45, AT-A10) connector, 100Base-FX (SC, AT- A11) connector, 100Base-FX (MT-RJ, AT-A20) connector or 100Base-FX (VF-45, AT-A21 ...

# 24 or 16 10Base-T ports for the AT-3726XL/AT-3716XL, plus one built-in 10/100Base-TX port capable of full- or half-duplex configurable through auto-negotiation (IEEE 802.3u standard) or manually settleable. # 12 10Base-FL ports (SC/ST) for the AT-3714FXL, capable of full- or half-duplex, manually configurable. # Additional 100Base modular port provides the ...

1-5 Network Management Features The switches have the following major network management features: # SNMP Management Information Base (MIB) II, SNMP MIB extensions, Bridging MIB (RFC 1493), and Telnet support deliver comprehensive in-band management # Web-based management # Local Omega, a menu-based management console, provides detailed out-of-band configuration # VLAN by port and 802.1Q VLAN tagging ...

on an overloaded network, increasing the number of unsuccessful transmission attempts. For detailed information concerning software and management features, refer to the AT- S20 User’s Guide. Mirror Port The switch has a dedicated Mirror port. Administrators can use the Omega software to configure the Mirror port and modes. The Mirror port can monitor traffic ...

1-7 Table 1-1 lists the features of the MDAs. For details concerning how to install an adapter, see Chapter 2, Installing a Media Dependent Adapter on page 2-11. Table 1-1 Media Dependent Adapter Features Adapter Supported Cable Description AT-A10 RJ45 10/100Base-TX RJ45 Ethernet port: auto-negotiated speed and duplex mode 10/100Base-T max. segment length: 330 ft (100 m), Category 5 UTP AT-A11 Fiber ...

VT100 terminal or a terminal emulation program such as HyperTerminal which is included with Microsoft ® Windows’ OS using a straight-through serial cable. Reset Button This recessed button can be activated using the tip of a ball point pen to reset the unit and run the power-on self tests. AC Power Connector The switch has a single power supply, which h ...

The AT-3726XL, AT-3716XL, and AT-3714FXL switch is 1.5 Rack Unit (RU) high and can be positioned on a desktop as a standalone unit or rack-mounted in a standard 19-inch rack. Verifying Switch Package Contents Make sure the following hardware components are included in your switch package. If any of the following items are missing or damaged, contact your sales representative. # AT-3726XL, AT-3716XL, or AT-3714FXL Switch ...

2-2 Safety Information Refer to Appendix A for translated safety statements in your language. Warning Electric Shock Hazard To prevent ELECTRIC shock, do not remove cover. No user-service- able parts inside. This unit contains HAZARDOUS VOLTAGES and should only be opened by a trained and qualified technician. To avoid the possibility of ELECTRIC SHOCK disconnect electric power to the product before connecting or disconnecting the LAN ...