Renesas PG-FP5 Setup Manual

Oct 03, 2016 PG-FP5 Flash Memory Programmer Setup Manual Thank you for purchasing the PG-FP5 flash memory programmer. This manual helps you to grasp the overview of preparation and startup for using the PG-FP5 and support for the product, so please read this manual thoroughly before using the product. Note the following p ...

Setup Manual R20UT0930EJ0400 Rev.4.00 Page 2 of 7 Oct 03, 2016 Chapter 1 OVERVIEW 1.1 Checking the Package Contents Check the package contents in accordance with the packing list supplied with the emulator. If there are any missing or damaged items, contact your local distributor. 1.2 User’s Manual The PG-FP5 package does n ...

Setup Manual R20UT0930EJ0400 Rev.4.00 Page 3 of 7 Oct 03, 2016 Chapter 2 SETUP This chapter explains preparation and startup for using the PG-FP5. For detailed usage after startup, refer to the PG-FP5 user’s manual. 2.1 Obtaining Software Download the programming GUI, USB driver, and PG-FP5 parameter file (PR5 file) from th ...

Setup Manual R20UT0930EJ0400 Rev.4.00 Page 4 of 7 Oct 03, 2016 2.4 PG-FP5 Startup After the cables are connected, press the POWER button on the PG-FP5. When the PG-FP5 is correctly started, the POWER LED is turned on and “Commands >” is displayed in the message display. If not, the cause may be a defect in the PG-FP5, ...

Setup Manual R20UT0930EJ0400 Rev.4.00 Page 5 of 7 Oct 03, 2016 (4) The Setup dialog box will be displayed. Click the Cancel button. (5) The following message will be displayed. Click the OK button. ...

Setup Manual R20UT0930EJ0400 Rev.4.00 Page 6 of 7 Oct 03, 2016 (6) The main window will open. 2.6 Check and Update of Version Use of the latest versions of the Programming GUI, firmware and FPGA is recommended. Versions can be checked as shown below. For how to update, refer to 3.4 Update of Programming GUI, firmware and FPGA ...

Setup Manual R20UT0930EJ0400 Rev.4.00 Page 7 of 7 Oct 03, 2016 2.7 Completion of Setup This completes the PG-FP5 setup. The Programming GUI can now be used. For how to perform the setup specific to the device or to perform programming with the target system connected, refer to the PG-FP5 User’s Manual and the user’s manual ...

the incorporation of these circuits, software, and information in the design of your equipment. Renesas Electronics assumes no responsibil ...