Partner RP-100-300II Programing Manual

[Name] The name of the command. [Format] The code sequence. [Range] Gives the allowable ranges for the arguments. [Description] Describes the command’s function. [Details] Describes the usage of the command in detail. [Notes] Provides important information on settin ...

(8) Inch A unit of length. One inch is 25.4 mm. (9) MSB Most Significant Bit (10) LSB Least Significant Bit (11) Base line Standard position when character data is stored in the print buffer. Normal chara ...

FF (*) Print and return to standard mode in page mode CAN (*) Cancel print data in page mode DLE EOT n (*) Real-time status transmission DLE ENQ n (*) Real-time request to printer DLE DC4 n m t H Generate pulse at real-ti ...

ESC{n Turns on/off upside-down printing mode FS p n m (*) Print NV bit image FS q n [xL xH yL yH d1...dk]1...[xL xH yL yH d1...dk]n (*) Define NV bit image GS ! n (*) Select character size GS $ nL nH (*) Set absolute vertical print position in page mode GS * x y d1 … ...

HT [Name] Horizontal tab [Format] ASCII HT Hex 09 Decimal 9 [Description] Moves the print position to the next horizontal tab position. [Details] • This command is ignored unless the next horizontal tab position has been set. • ...

•If data that existed in the previously specified printing area also exists in the currently specified printing area, it is deleted. [Reference] ESC L, ESC W DLE EOT n (*) [Name] Real-time status transmission [Format] ASCII DLE ...

full, or there is an error status with a serial interface model. • With a parallel interface model, this command can not be executed when the printer is busy. This command is executed even when the printer is off-line or there ...

1 08 8 Auto-cutter error occurs. 4 1 10 16 Not used. Fixed to On. 5 0 00 0 No unrecoverable error. 1 20 32 Unrecoverable error occurs. 6 0 00 0 No auto-recoverable error. 1 40 64 Auto recoverable error occurs. 7 0 00 0 Not used. Fixed to Off. 3 0 00 0 No auto-cutter error. 1 08 8 Aut ...

printer is busy. This command is executed even when the printer is off-line or there is an error status when DIP switch 2-1 is on with a parallel interface model. • The status is also transmitted whenever the data sequence of <10>H<05 ...