Sangean DPR-34 Plus Operating Instruction

Text of Sangean DPR-34 Plus Operating Instruction

Instruccions de manejo

Gebruiksaanwijzing Bedienungsanleitung GB F E NL D DAB+/FM RDS personal stereo receiver Récepteur radio personnel DAB+/FM RDS stéréo Receptor estéreo personal DAB+/FM RDS DAB+/FM RDS persoonlijke stereo-ontvanger Tragbarer DAB+/UKW-RDS- Stereo-Empfänger 3A81TD12D000A

Important Safety Instructions

1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that

9. Do not defeat the safety purpose of the

polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet. consult an electrician for replacement of the obsolete outlet. 10. Protect the power cord from being

Sangean DPR-34 Plus 12. Use only with the cart, stand, tripod,

bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. 13. Unplug this apparatus during lightning storms or when unused for long periods of time. 14. Refer all servicing to qualified service personnel. Servicing is required when the

15. To Reduce the Risk of Fire or

Electric Shock, Do not Expose This Appliance To Rain or Moisture. 16. The Shock Hazard Marking and Associated Graphical Symbol is provided on the bottom panel of unit. 17. Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, shall not be placed on the apparatus.

Sangean DPR-34 Plus 1. Headphone socket

2. Lock switch (Note: If this is activated the radio will not operate) 3. Telescopic antenna 4. Power button 5. Volume Control 6. LCD display 7. Loudspeaker 8. Tuning/Menu jog wheel 9. DC socket GB

Charging the radio

The DPR 34 features a built in 1800mAH Lithium rechargeable battery to power the radio. Before operating the radio for the first time please fully charge the battery. The DPR 34 is supplied with a 5V/500 mA AC adaptor. 1. Insert the adaptor plug into the DC socket on the right side of your radio. Plug the adaptor into a standard mains outlet and the radio will begin charging the built in battery. Charging time is approx.

The battery run time is approx. 15 hours

listening through the speaker and approx 18 hours with headphones. Reduced power, distortion, ‘stuttering’ sounds or battery power indicator in “low” are all signs that the battery needs to be recharged. Note: If charging the radio when the power is off, the battery power icon does not display on the LCD. Headphones The 3.5 mm stereo headphone socket located on the top of your radio is provided for use wit

Sangean DPR-34 Plus Setting the clock

The DPR 34’s clock will automatically update each time you turn on the radio and tune to a DAB+ radio station or to an FM station which is broadcasting the time via RDS. Time display will flash 0:00 for a few seconds then display the clock time when it receives DAB+ or FM – RDS clock time signal. Initial operation – DAB+ (Digital Radio) This step is only necessary for initial setup – 1. Ensure the battery is fully charged. 2. Fu

4. The display will show “Welcome to

Digital Radio” and start to scan the entire DAB+ channel range and stop at the first found station. If the radio has been used before, the last used station will be selected. Press in the tuning/menu jog wheel to play the station. 5. Turn the jog wheel either up or down to display station list and find desired station. Press in the jog wheel to select the station. The radio

Service Information – DAB+

The Service Information display - Technical information on the current status of the station being broadcast. While listening to DAB+, continually press in the jog wheel to cycle through information on a. b. c. d. e. f. g. Program type (PTY) Multiplex Name Time Date Channel and Frequency Bit Rate and Codec Signal Strength

Press in and hold the jog wheel for 2 seconds

to enter the menu list. The display will first show DAB and . Turn the jog wheel up or down and choose from the following options: ‘Find Services’, ‘Back’, ‘FM mode’, ‘Settings and Favorites’. A) Find Services – Press in the tuning/menu jog wheel and turn up or down to select… a) Scan – press in the jog wheel to scan the whole DAB+ netwo

Sangean DPR-34 Plus B) Back –

Press in the jog wheel to go back to current listening status. C) FM mode – Press in the jog wheel to select FM band. D) Settings – Press in the jog wheel to select from following settings options: a) Auto select – Press in and turn the jog wheel to select YES or NO. Default setting is NO. Press YES and the radio will auto select and tune to the station shown on the display within a few secon

c) SW version –

Press in the jog wheel to view software version installed in the radio. Press in the jog wheel again to go back to Settings menu. d) Factory reset – Press in and turn the jog wheel to select YES or NO. Select YES to erase all saved settings, station lists and favorites. All settings will revert to factory default. e) Set contrast – Turn and press

g) DRC –

Dynamic Range Control (DRC) feature can make quieter sounds easier to hear, especially when your radio is used in a noisy environment. This function only works within the DAB+ band. Press in DRC and turn the jog wheel to cycle through; DRC off, DRC Low and DRC High. Press in to select your preferred option: DRC off – DRC is switched off, broa

h) Service Information –

Press in the jog wheel each time to cycle through DLS (Radio Text) information. Options are: back, signal strength, broadcasting bit rate, frequency, date, time, ensemble and program type. i) Sleep – Use the Sleep menu to set auto shut off timer. Press in the jog wheel to cycle through: Sleep off (auto shut off disabled), 90 min, 60 min,

E) Favorites –

The Favorites menu is used to store and recall favorite stations. You can store a maximum of 10 stations in the DAB+ band. Store a station Tune to a station as per previous instructions, press in jog wheel to allocate Favorites menu. Press in the jog wheel again to find “Preset Store”. Turn the jog wheel to allocate preset number you wish to use (1-10). Press in the jog wheel and the display will show “preset x stored”. Repeat t

Recall a station

Press in the jog wheel to find “Preset Recall”. Turn the jog wheel to find the preset station you wish to recall. Press in the jog wheel to select. Operating your radio – FM 1. Turn on the radio by pressing Power button. Press in jog wheel for 2 seconds to enter Menu. Turn jog wheel and scroll to FM Mode and press in to select the FM band. Searching tuning - FM 1. Turn the jog wheel either down or down until di

Manual tuning – FM

Turn and release the jog wheel either up or down to change the frequency in 50 kHz increments until you find the desired station. Service information When listening to an FM radio station with RDS broadcasting, press in the jog wheel to cycle through the Radio Text information; Pty, Audio Type, Time, Date and Frequency. Menu Press in the jog wheel for 2 seconds to enter FM Menu. Turn the jog wheel either down or up-down to find Favo

Sangean Stereo Receiver Owners Instructions: