Texas Instruments LM3886 Overture Manual
Text of the manual
LM3886 Overture™ Audio Power Amplifier Series
High-Performance 68W Audio Power Amplifier w/Mute
General Description
The LM3886 is a high-performance audio power amplifier
capable of delivering 68W of continuous average power to a
4Ω
load
and
38W
into
8Ω
with
0.1% THD+N
from
20Hz–20kHz.
The performance of the LM3886, utilizing its Self Peak In-
stanta
Plastic Package (Note 12)
01183302
Note 1: Preliminary: call you local National Sales Rep. or distributor for availability
Top View
Order Number LM3886T
or LM3886TF
See NS Package Number TA11B for
Staggered Lead Non-Isolated
Package or TF11B (Note 1) for
Staggered Lead Isolated Package
LM3886
www.national.com
2
Absolute Maximum Ratings (Notes 6, 5)
If Military/Aerospace specified devices are required, please contact the National Semiconductor Sales Office/
Distributors for availability and specifications.
Supply Voltage |V+|+|V−|
(No Signal)
94V
Supply Voltage |V+|+|V−|
(Input Signal)
84V
Common Mode Input Voltage
(V+ or V−) and
|V+| + |V−| ≤ 80V
Differen
Electrical Characteristics (Notes 5, 6)
(Continued)
The following specifications apply for V+ = +28V, V− = −28V, IMUTE = −0.5 mA with RL = 4Ω unless otherwise specified. Limits
apply for TA = 25˚C.
Symbol
Parameter
Conditions
LM3886
Units
(Limits)
Typical
(Note 10)
Limit
(Note 11)
CMRR
(Note 3)
Common Mode Rejection Ratio
V+ = 60V to 20V, V− = −
Test Circuit #1
(DC Electrical Test Circuit)
01183303
Test Circuit #2
(AC Electrical Test Circuit)
01183304
LM3886
www.national.com
5
Single Supply Application Circuit
01183305
*Optional components dependent upon specific design requirements. Refer to the External
Components Description section for a component functional description.
FIGURE 2. Typical Single Supply Audio Amplifier Application Circuit
LM3886
www.national.com
6
External Components Description
(Figure 1 and Figure 2)
Components
Functional Description
1.
RIN
Acts as a volume control by setting the voltage level allowed to the amplifier’s input terminals.
2.
RA
Provides DC voltage biasing for the single supply operation and bias current for the positive input terminal.
3.
CA
Provides bias filtering.
4.
C
Provides AC