Sauder 413322 Instruction Booklet
Text of Sauder 413322 Instruction Booklet
NOTE: THIS INSTRUCTION
BOOKLET CONTAINS IMPORTANT
SAFETY INFORMATION.
PLEASE READ AND KEEP FOR
FUTURE REFERENCE.
English pg 1-8
Français pg 9-10
Español pg 11-12
Lot # 360255
02/18/14
Purchased: __________________
Be sure to give us a ring before
making any returns. 1-800-523-3987
3-Shelf Bookcase
413322
Need help? Visit Sauder.com to view video assembly tips or chat with a live rep.
Prefer the phone? Call 1-800-523-3987.
Share your journey!
sauder.com
Table of Contents
Assembly Tools Required
3
4
5-8
9-10
11-12
13-14
15
Part Identifi cation
Hardware Identifi cation
Assembly Steps
Français
Español
Safety
Warranty
Hammer
Not actual size
No. 2 Phillips Screwdriver
Tip Shown Actual Size
Skip the power trip.
This time.
413322
www.sauder.com/services
Page 2
Part Identifi cation
å
While not all parts are labeled, some of the parts will have a label or an inked letter on the edge
to help distinguish similar parts from each other. Use this part identifi cation to help identify similar parts.
A3
END (2)
B
TOP/BOTTOM (2)
C
BACK (1)
D
ADJUSTABLE SHELF (2)
Now you know
our ABCs.
413322
www.sauder.com/services
Page 3
A3
B
C
D
B
D
A3
Hardware Identifi cation
å
Screws are shown actual size. You may receive extra hardware with your unit.
413322
www.sauder.com/services
Page 4
NAIL - 25
I
RUBBER SLEEVE - 8
F
METAL PIN - 8
E
BLACK 1-15/16" FLAT HEAD SCREW - 8
H
APPLIQUE CARD - 1
G
Look for this icon. It means a
video assembly tip is available at
www.sauder.com/services/tips
å
Assemble your unit on a carpeted fl oor or on the empty
carton to avoid scratching your unit or the fl oor.
å
Fasten the ENDS (A3) to the TOP/BOTTOMS (B). Use
eight BLACK 1-15/16" FLAT HEAD SCREWS (H).
413322
www.sauder.com/services
Page 5
A3
B
B
A3
H
BLACK 1-15/16" FLAT HEAD SCREW
(8 used in this step)
Unfi nished surface
Unfi nished surface
Un�
Do not stand the unit upright without the
BACK fastened. The unit may collapse.
Caution
Unfi nished
surface
NAIL
(25 used in this step)
I
C
å
Unfold the BACK (C) and lay it over your unit.
å
Make equal margins along all four edges of the BACK (C).
Push on opposite corners of your unit if needed to make
it "square".
å
Fasten the BACK (C) to your unit using the NAILS (I). The
NAILS should be 5-1/2" ap
Carefully stand your unit upright.
å
Push the RUBBER SLEEVES (F) over the METAL PINS (E).
Insert the METAL PINS into the hole locations of your choice
in the ENDS (A3). Set the ADJUSTABLE SHELVES (D) onto
the METAL PINS.
Step 3
413322
www.sauder.com/services
Page 7
Pro Tip: Lift with your
legs. And, you know,
your arms.
A3
D
D
A3
E
F
(8 used)
Peel the APPLIQUES from the APPLIQUE CARD (G). Stick the APPLIQUES over the SCREW heads in the ENDS (A3).
å
NOTE: Please read the back pages of the instruction booklet for important safety information.
å
This completes assembly. Clean with your favorite furniture polish or a damp cloth. Wipe dry.
413322
www.sauder.com/services
Page 8
And to celebrate, why not share your success story?
(8 used)
25 lbs.
40 lbs.
25 lbs.
25 lbs.
G
A3
A3