Sealey MW131 Instructions Manual

...

Thank you for purchasing a sealey product. Manufactured to a high standard this product will, if used according to these instructions and properly maintained, give you years of trouble free performance. IMPORTANT: BEFORE USING THIS PRODUCT, PLEASE READ THE INSTRUCTIONS CAREFULLY. MAKE CAREFUL NO ...

for TIG welding with a wide variety of rods including rutile, basic and stainless from Ø1.6mm up to Ø3.2mm (MW131) and Ø4mm (MW151 & MW151PlUs). Includes thermal cut-out and mains voltage leds. Fitted w ...

 WARNING! Ensure that the inverter is not plugged into the mains power supply before assembling, connecting or disconnecting cables. For electrical installation, see Safety Instructions (Section 1).  WARNING! Failure to follow the electrical safety instructions may affect the operating performance and could damage the built-in sa ...

Rocker switch. Turns mains power on and off. 7.2. FRONT PANEL (Fig.7). 7.2.1. Potentiometer. Regulates welding current with graduated outer scale in Amps. May be adjusted during welding. Inner scale indicates recommended settings for different welding rod diameters. Refer to your particular model for the a ...

On the rear of the inverter is the ratings plate, giving the following data: 1 - Rating of internal protection provided by casing. 2 - symbol for power supply line: 1= single-phase AC. 3 - S: Indicates that welding may be carried out in environments with a heightened risk of electric shock e.g. very close to large metallic objects. 4 - ...

covers should be closed and properly fastened when the welding equipment is in operation. The welding equipment should not be modified in any way except for those changes and adjustments covered in these instructions. In pa ...