Sealey SCT125 Instructions

950W 230V MODEL NO: SCT125 IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRA ...

� Saw blades must be securely attached before use, but not overtightened. � Secure unstable workpiece with a clamp, vice or other adequate holding device and ensure that the saw is gripped with both hands. � Keep children ...

2. On/Off switch 3. Safety button 4. Twin blades 5. Rear handle 6. Locking button for rear handle 7. Auxiliary handle 8. Safety guard 9. Lever for safety guard 10.Wax stick 11.Feeding knob for wax stick 12.Wrench 13.Feed Aperture 2. INTRODUCTION 3. SPECIFICATION 4. OPERATION Designed for cutting metals, plastics, woods a ...

aluminium, copper, steel and iron which produce swarf likely to adhere to the blades. 4.2.2. Lubrication is achieved by inserting a wax stick (figs.1.10 & 2.10) into the feed aperture (figs.1.13 & 2.13) and winding in with the feed knob (figs1.11 & 2.11) until the tip ...

This tool may cause Hand Arm Vibration Syndrome if its use is not managed adequately. This tool is subject to the vibration testing section of the Machinery Directive 2006/42/EC. This tool is to be operated in accordance with these instructions. Measured vibration emission value (a): . . . . . . . . . .4.96 m/ ...