Sealey PMG100.V2 Instructions Manual

Text of Sealey PMG100.V2 Instructions Manual

PMG100.V2, PMG110.V2, PMG135XT.V2, PMG155XT.V2 - 2 - 120407

INSTRUCTIONS FOR GASLESS MIG W WELDERS

GASLESS MIG WELDERS

Thank you for purchasing a Sealey welder. Manufactured to a high standard this product will, if used according to these instructions and properly maintained, give you years of trouble free performance. PMG100.V2, PMG110.V2, PMG135XT.V2 & PMG155XT.V2 IMPORTANT: BEFORE USING THIS PRODUCT, PLEASE READ THE INSTRUCTIONS CAREFU

IMPORTANT: These instructions contain information you require to prepare your machine for welding, together with maintenance and a trouble

shooting section. If you have no previous experience the instructions are not intended to show you how to weld. If you have no experience, we recommend that you seek training from an expert source. Mig welding is relative

Fitting wire reel

Your machine will accept spools of wire up to 5kg without modification. 4.5.1. Align spindle (fig. 2.A) with holes in internal side panel and secure with two self tapping screws (B). Place spool (C) onto spindle, ensuring that the spool rotates clockwise with wire drawing off the top (see fig. 4), followed by plast

CONVERSION TO MIG (GAS) WELDING

fig. 11 For welding stainless steel or aluminium, the gasless mig welder (with the exception of model PMG100) can be converted to a conventional mig welder. To convert to gas, just order a reel of regular wire, a bottle of gas and a conversion kit. Kit contains regulator plus tips and nozzles. 6.1. Welder conversion 6.1.1.

Wire feed unit

Check the wire feed unit at regular intervals. The feed roller wire guide plays an important part in obtaining consistent results. Poor wire feeding affects welding. Clean the rollers weekly, especially the feed roller groove, removing all dust deposits. 9.2. Torch Protect the torch cable from mechanical wear. Clean the liner from the mac

Sealey Welding System Owners Instructions: