Altina A800 Operation & User’s Manual
Text of Altina A800 Operation & User’s Manual
All brand and product names are trademarks or registered trademarks of their
respective companies.
Note
The information in this manual is subject to change without notice.
Before You Start
※ Precautions and Notices
※ For your own safety, do not operate the controls of the product while
driving.
※ Use this product prudently. The product is intended to be used only as a
navigation aid. It is not for precise measurement of direction, distance,
location or topography.
※ The calculated route is for reference only. It is the user’s responsibility
to follow the traffic signs and local regulations along th
※ Optimal route calculation and trip plan
※ Friendly and efficient navigation with turn-by-turn, voice, and visual
guidance
※ Various ways for searching a location on the map
- Using a known address
- Using a POI (point of interest)
- Using Favorites (personal stored locations)
- Using History (previous destinations)
※ Recording and playback of journeys
※ Viewing modes for different needs and situations:
- 2D or 3D
- Daytime or nighttime view
-
Part I. Basic Operations
Part I guides you through the process of getting your device running, familiarizes
you with the external components, and tells you how to customize system
settings
1. Getting Started
This chapter tells you step by step how to perform the initial startup and
introduces you to the external components of your device.
1.1 Setting the ON/OFF Switch
The ON/OFF switch should be set to the ON position for normal operation.
CAUTION: Always leave the ON/OFF switch in the ON position for normal
operation.
On / Off Switch
Reset
1.2 Connecting to AC Power and Charging the
Battery
Fully charge the battery before using your device for the first time.
1.
Connect the adapter cable to the right side of your device.
2.
Plug the AC adapter into a wall outlet.
3. Turn on ON / OFF switch on the bottom of the device while battery is in
charging.
※ The charge indicator glows red static when charging is in progress. Do not
disconnect your device from AC power until the battery is fully c
1.3 Using Your Device in a Vehicle
A car holder and a car charger are supplied with your device.
Using the Car Holder
※CAUTION:
1.Select an appropriate location for the car holder. Never place the holder
where the driver’s field of vision is blocked.
2.If the car’s windshield is tinted with a reflective coating, an external antenna
(optional) may be needed to route the antenna to the top of the car through
a window. When closing the car window, be
Connecting the Car Charger
The car charger supplies power to your device when you are using the device in
a car.
※CAUTION : To protect your device against sudden surges in current,
connect the car charger only after the car engine has been
started.
1.Connect one end of the car charger to the power connector of your device.
2.Connect the other end to the cigarette lighter in the car to power and
charge your device.
1.4 Understanding Hardware Features
NOTE: Depending upon the specific model purchased, the color of your device
may not exactly match the device shown in this manual.
Front Components
Ref
Component
Description
n Charge Indicator
Battery Full – Green (Static)
Battery in charging -- Red (Static)
n Charge indicator
Altina A800 Sends out music, sounds and voice.
Y External Antenna
Connector
This connector (under rubber dust cover) allows use of an
optional external antenna with magnetic mount, which may be
positioned on top of the car for better signal reception in areas
with poor reception.
n Speaker
o External Antenna Connector
n Volume Increase
Press the button to increase the volume
Y Volume Decrease
Press the button to decrease the volume
Z SD/MMC Slot
Accepts a SD (Secure Digital) or MMC (MultiMediaCard) card
for accessing data such as maps and MP3 music.
NOTE: Before using GPS navigation software and maps, you
need to insert the storage card included with your device. Do
not remove the card during GPS operation.
nVolume incre
n Power ON/OFF
Turn on and turn off the power.
o Reset button
Restarts your device (soft reset).
p Headphone Connector Connects to stereo headphones.
q USB port
Use the USB port to connect to pc, or connect to a USB plug
of power adaptor for charging.
n Power ON/OFF
o Reset button
p Earphone jack
q USB port
Altina A800 n ON/OFF Switch
The main power / battery cut off switch. Be sure to turn on the
ON / OFF switch while battery is in charging.
Ps. If turn off ON / OFF switch while battery is in charging, the
battery can not be charged. In stead, the device will still
function when plug-in with a power adaptor or a car charger.
n ON/OFF Switch
2. Basic Skills
This chapter guides you through the process of using your device and
familiarizes you with the basic operations such as using the stylus pen and
navigation pad..
2.1 Turning On and Off Your Device
Use the power button
on the right side of your device to turn on and off
your device.
When you turn on the device for the first time, the Main screen appears as
shown below. There are three buttons on the Main screen: SETTINGS,
NAVIGATION, and
Altina A800 2.2 Operating Your Device
To operate your device, use the hardware buttons and/or the stylus pen.
Using Hardware Buttons
Button
Name
Description
Power On/Off
Turns on and off the LCD panel, and enter to suspend
mode.
Volume
Volume Increase
Volume
Volume Decrease
3. System Settings
Your device is supplied with default settings. You may also customize the
settings to suit your personal needs. Once you change settings, your new
settings will remain until either you change them again, or until battery cut off
switch is turned off and then back on again, which resets the unit to factory
defaults.
3.1 Using System Settings
Tap the SETTINGS button on the Main screen.