Zvox Audio SB400 Setup & Operation Manual
Text of the manual
Setup & Operation
Don't Worry It's Pretty Easy.
STEP 1
Position The System.
STEP2
Connect One Signal Cable.
STEP3
Connect the Power cable.
STEP4
Use the Soundbar remote to
turn on power and adjust volume.
Home Theater
Made Simple!
What's In The Box
SB400/SB500 cabinet • Remote control • Instruction sheets
AC power cord • Optical Digital and Analog sign
READ THIS FIRST
Important Safety Instructions For ZVOX System
TO PREVENT FIRE OR
SHOCK HAZARD, DO
NOT EXPOSE THIS
APPLIANCE TO RAIN
OR MOISTURE.
THIS APPLIANCE SHALL
NOT BE EXPOSED
TO DRIPPING OR
SPLASHING WATER
AND NO OBJECT
FILLED WITH LIQUIDS
SUCH AS VASES
SHALL BE PLACED
ON APPARATUS.
Warning: To reduce
the risk of electrical
shock, do not remove
cover (
Simple Setup - Just Four Steps
Place or
hang the
SB400/SB500.
Connect the
SB400/SB500
to your TV.
Learn the
features of the
SB400/SB500.
"Teach" the
SB400/SB500
your preferred
remote.
D
Face Front
Face Up
Wall Mount
1. Speaker placement
You can place the SB400/SB500 on any flat, stable surface near your TV.
There are three general placement options, illustra
Analog Audio Output
You can connect a TV set's analog audio output to the analog audio input on the the
SB400/SB500 (which is left and right RCA jacks). The analog audio output on your TV will
be a 1/8 inch stereo minijack or a pair of RCA jacks. The two illustrations below show the
appearance of these two audio output connections.
You can connect a TV's lef
4a. Infrared Remote Control of the
SB400/SB500
Learning:
You can "teach" the SB400/SB500 to respond to your
current TV remote control for the following functions:
VOLUME, MUTE and POWER. This is described in the
separate instruction sheet beginning "Teach Your SB400/
SB500 ... " After this "learning" process, you will not need
the SB400/SB500 remote control
4b. End Panel Controls on the
SB400/SB500
On the viewer's right end of the speaker
are four buttons.
A) POWER button:
This button turns the 88400/88500 "ON" if
it is in Standby. If this button pressed briefly
while the 88400/88500 is "ON", it will mute
and unmute the 88400/88500. To turn off
the 88400/88500, press and hold down this
button for about five sec
Place the SB400/SB500
on stable, flat surface.
Ensure all components
are stable and secure.
Optical Audio Output
Connect one end of an
optical digital cable to
the TV’s optical digital
Audio Out jack.
With a digital audio
connection, you
should hear the TV
sound through the
SB400/SB500 with the
soundbar’s volume set
to 12-15
The PS Menu
The SB400 and SB500 have adjustments
that could prove useful, depending on the
installation location and user preferences.
The adjustments are made through the PS
Menu feature of both soundbars.
For instance, your TV set may not have a
provision to turn off the internal speakers
or the TV may display a distracting "TV
speakers off" message. Adjus
PS Emulation Modes
Please note: the PS menu number sequence skips some numbers.
The first six options in the PS menu are emulation modes. See "Using the SB400/SB500
remote control emulation modes" for instructions.
-
No brand
Sony
emulation
LG
Additional PS Settings
Samsung Vizio
Panasonic Marantz
Additional SB400/SB500 adjustments affect how you turn the so