Sun Microsystems Netra T4 AC100 Service And System Reference Manual

901 San Antonio Road Palo Alto, CA 94303-4900 U.S.A. 650-960-1300 Send comments about this document to: [email protected] Netra™ T4 AC100/DC100 Service and System Reference Manual Part No. 806-7336-11 August 2001, Revision A all-guides.co m ...

This product or document is distributed under licenses restricting its use, copying, distribution, and decompilation. No part of this product or document may be reproduced in any form by any means without prior written authorizatio ...

1-5 1.3 Environmental Performance 1-5 1.4 LEDs 1-6 1.4.1 System LEDs 1-6 1.4.2 LOMlite 2 LEDs 1-8 1.4.3 PSU LEDs 1-10 2. Power-On Self Test 2-1 2.1 POST Overview 2-1 2.1.1 How to Use POST 2-2 2.2 Pre-POST Preparation 2-3 2.3 Running POST 2-4 2.4 ...

3. SunVTS 3-1 3.1 The Validation Test Suite 3-1 3.1.1 SunVTS Requirements 3-2 3.1.2 SunVTS References 3-2 3.1.3 Installation 3-3 3.1.4 New and Modified Features and Options 3-3 3.1.5 Starting SunVTS 3-5 3.2 SunVTS Tests 3-6 3.2.1 Guide to Using SunVTS 4.4 3-8 4. Troubleshooting 4-1 4 ...

5-4 5.4 Disconnection and Isolation 5-5 5.4.1 Netra T4 AC100 System 5-5 5.4.2 Netra T4 DC100 System 5-5 5.5 Antistatic Precautions 5-5 5.5.1 Attaching the Antistatic Wrist Strap 5-6 5.6 Top Access Cover 5-8 5.6.1 Preparation 5-9 5.6.2 Removing the Top Access Cover 5-9 5.6.3 Fitting the Top Access Cover 5-9 5.7 Front F ...

7. Fan Subassemblies 7-1 7.1 PSU Fans 7-2 7.1.1 Preparation 7-3 7.1.2 Removing the PSU Fans Assembly 7-4 7.1.3 Installing the PSU Fans Assembly 7-4 7.2 CPU Fan Assembly 7-5 7.2.1 Preparation 7-5 7.2.2 Removing the CPU Fan Assembly 7-7 7.2.3 Installing the CPU Fan Assembly 7-7 8. Stor ...

9-3 9.2 Processor Modules 9-4 9.2.1 Preparation 9-6 9.2.2 Removing a CPU Module 9-6 9.2.3 Installing a CPU Module 9-7 9.3 Memory Modules 9-9 9.3.1 Preparation 9-10 9.3.2 Removing a Memory Module 9-11 9.3.3 Installing a Memory Module 9-11 9.4 Replaceable Battery 9-12 9.4.1 Preparation 9-12 9.4.2 Removing the Battery 9- ...

10.2.1 UltraSPARC-III Processor 10-3 10.2.2 Main Memory 10-6 10.2.3 I/O Subsystem 10-11 10.2.4 Interrupts 10-16 10.2.5 BootBus 10-17 10.2.6 I2C Bus 10-20 10.2.7 PCI Bus 10-22 10.2.8 Peripherals 10-24 10.2.9 Other Peripheral Assembly Options 10-25 10.2.10 USB Ports 10-25 10.2.11 Par ...

11-12 12. Modem Setup 12-1 12.1 To Set Up the Modem 12-1 12.2 Serial Port Speed Change 12-2 12.3 Recommendations 12-2 A. Illustrated Parts List A-1 B. Product Specification B-1 B.1 Physical Specification B ...

D.4 Power Connectors D-5 E. Example POST Diagnostic Output E-1 F. Updating LOMlite2 Firmware F-1 G. Connecting to the Netra T4 Server G-1 G.1 Connecting to the LOM Serial Port G-1 G.2 Connecting to the Serial Ports G-2 ...