suprema BioLite Net Operation & User’s Manual

Getting Started ................................................................................................ 6 Components ................................................................................................................ ...

Reboot .......................................................................................................................................................... 17 Troubleshooting ....................... ...

for preventing damage to the user's property. Warning Violation of the instructions may cause serious injury or death. Installation Instructions Do not install the product in direct sunlight or i ...

• This can cause a failure. Keep the password secret from others and change it periodically. • Failure to do so may lead to an illegal intrusion. Do not press the buttons on the product with excessive force or with a sharp tool. • This can ca ...

• For more information about installation, visit www.supremainc.com. BioLite Net Main bracket Extension bracket Mounting screws (2 pcs) Screw anchors (2 pcs) Heat shrink tubes Ethernet connector Hex wrench (for mounting bracket) Diode (1 pc ...

Name Feature LCD screen Displays various information or settings. Keypad • 0–9 buttons: For entering an ID or password. • < > direction button: Navigates to an item. When entering numbers or an IP address, the < button can be used to delete the value entered. • button: Chooses a function. • button: Enters o ...

Register a fingerprint correctly to improve the recognition rate of the fingerprint. BioLite Net can read a fingerprint even when the angle or position of the finger has changed. If you register a fingerprint with the following instructions, the recognition rate can be improved. Choosing a finger for registration • ...

User information including fingerprints can be registered. • User information cannot be registered if RS-485 Mode is set to Slave. Refer to RS-485 Mode configuration in order to change the communication mode. 1 Press the MENU button, and then authenticate with the administrator authentication met ...

User administrator or Super administrator can change the information of a registered user. They can add the fingerprints or card of the user, and also change PIN or authority. • User information cannot be changed if RS-485 Mode is set to Slave. Refer to RS-485 Mode configuration in order to change the communication ...