Swann 4-4350 Quick Start Manual

Text of the manual

DVR Quick Start Guide

QH_484350140416E | © Swann 2016 Welcome! Lets get started. READ ME FIRST! To start using your DVR, you need the following - 1. A high-definition TV capable of displaying 720p or 1080p video. Look at the ports on the back of your TV to make sure it has an HDMI input. 2. A router with a broadband Internet connec- tion. 3. A mobile devi

Congratulations on the purchase of your Swann DVR. This quick start guide will assist you on getting your DVR up and

running as soon as possible. We recommend that you connect everything and give it a try before you do a permanent installation, to make sure nothing was damaged during shipping. On the other side is a detailed connection map which illustrate

What does this mean?

1) Camera Inputs - Connect your cameras here. Twist the video connection to lock it in place. 3) HDMI Port - Connect this to your TV with a HDMI input (HDMI cable supplied). 2) VGA Port - Connect this to your monitor with a VGA input (VGA cable not supplied). This is not required when using the HDMI port. 4) Audio In Port - For connect

Step One - Connect your Cameras

1. Connect the video output and power input connection on the camera to the corresponding connections on the supplied video & power cable. 2. Connect the supplied power splitter to the other end of the video & power cable. This provides power to multiple cameras using a single power adapter. 3. Connect the other end of the p

Connect the supplied Ethernet cable (1) to the Ethernet port on your DVR then connect the other end to a spare port on

your router (2). Don’t proceed to the next step until this is done. Step Two - Connect to your Home Network 1 VIDEO IN VGA AUDIO LAN & USB 12V IN IN IN IN OUT 1 2 3 4 5 6 7 8 USB Internet 4 3 2 Please note - It’s important that you do

Connect the supplied mouse (1) to the bottom USB port. To copy your video recordings and to perform a firmware

upgrade, connect a USB storage device (2) such as a flash drive (not included) to the top port. Step Three - Connect your Mouse 1 VIDEO IN VGA AUDIO LAN & USB 12V IN IN IN IN OUT 1 2 3 4 5 6 7 8 Please note - Bluetooth and wireless mice and trackp

Connect the supplied HDMI cable to the HDMI output on your DVR then connect the other end to a spare HDMI input

(1) on your TV. Press the A/V button on your TV’s remote to select the HDMI input (in this case it would be HDMI 1). Step Four - Connect to your TV HDMI IN 2 HDMI IN 1 1 VIDEO IN VGA AUDIO LAN & USB 12V IN IN IN IN OUT 1 2 3 4 5 6 7 8 Press the

If you have a monitor with a VGA connection, connect a VGA cable (not supplied) to the VGA port on the DVR then

connect the other end to the VGA input (1) on your monitor. Step Five - Connect to your Monitor A VGA cable and monitor are not required when using the HDMI cable. 1 VIDEO IN VGA AUDIO LAN & USB 12V IN IN IN IN OUT 1 2 3 4 5 6 7 8

Connect the supplied power adapter’s power connection (1) to the power input on your DVR first (this will minimise

sparking) then connect the power adapter to a power outlet (2). Press the outlet’s switch to supply power. Step Six - Connect your Power Adapter 1 VIDEO IN VGA AUDIO LAN & USB 12V IN IN IN IN OUT 1 2 3 4 5 6 7 8 2 All connections have now

Other DVR Manuals