Synergy iOSD Operation & User’s Manual

Disclaimer Thank you for purchasing product(s) from DJI Innovations. Please read the instructions carefully before installing the hardware and software for this product, this will ensure trouble free operation of your iOSD. Please use DJI products in accordance with the provisions of your local authorities and regulations. As DJI Innovations has no control over use, setup, final assembly, modification (including use of non-specified DJI parts i.e. motors, ESCs, propellers, etc.) ...

In the Box iOSD Controller ×1 Connect the iOSD controller to your DJI autopilot system via CAN-Bus Cable. It communicates with the main controller, receives data from the main controller, superimposes the data with the video image, and then transmits the whole information via a transmitter. CAN-Bus Cable ×2 Connect the iOSD to your autopilot system through a CAN-Bus cable. dJI dJI dJI dJI Video Input Cable ×1 Connect the iOSD with video input source (i.e. camera or DJI Z15) fo ...

Connection Between iOSD and Autopilot System Connection Between iOSD and NAZA-M/NAZA-M V2 1. If use with DJI multi-rotor, you can solder the power cable of the PMU V2 to the power pads on frame bottom board. Please refer to DJI multi-rotor manual for details. Then connect the iOSD to a battery. 2. If use with 3rd part aircraft, you can make a connecter by yourself to connect PMU V2 and battery. (1) NAZA-M (Fig.1): Make a connecter to connect the PMU V2 (NAZA-M V2 Accessory), iOS ...

Display Screen DJI Autopilot System B A T T Wireless Video RX PMU 12.0V 1m ATT FS 0 0.0 D H P 0o R 0o CH AV1 0.0 m s Video Input Port · If you use the DJI Z15, it is recommended to use the 4Pin- Audio Head cable for connecting the iOSD and GCU. If you use the 4Pin cable, please connect the iOSD to the Z15's GCU according to the above chart. · If you use your own camera(s), please connect through the Video Input Cable according the pin description. AV1/AV2 pin：you can selec ...