Sigma BM30 Instruction Book

INSTRUCTION BOOK PLANETARY MIXER BM30 ...

CHAPTER 2 INSTALLATION, USE, MAINTENANCE 2-1 INSTALLATION� ...

rpm min 40 RATING PLATE MACHINE DESCRIPTION Manufactured in: ITALY Volt Hz Mod. Kw Via Artigianato, 85 - 25030 Torbole Casaglia - BRESCIA - ITALY Tel. 030/2650479-488 - Fax 030/2650143 N° 240 1170 525 60 650 730 615 ...

cream shop or they can also be used as auxiliary mixers. They are driven by a high-capacity motor and the special belt speed change variator features a great velocity ratio that provides a wide spread between the maximum and minimum speed of the planetary with consequent ...

can be regulated in its highness.. Next to the machine, a lead must be installed; wires section of 1,5 mm2 at least and tap with blocked plug. Make sure that volt, Hz, kw comply with the ones indicated on the rating plate of the machine. ATTENTION: At the start ...

button (pos.2). ATTENTION: when lifting the safety grid the machine immediately stops working, but the timer does not return to zero and goes on counting the elapsing time. It is therefore always advisable to wait for the end of the set time. After any mixing process r ...

THE MIXER IS UNPLUGGED AND POWER IS DISCONNECTED. The machine does not need particular maintenance operations. Check worn-out level of the belt after the first three months. Periodically grease every 4 ÷ 6 months the points shown in the following sketch (use MOLYKOTE 165 LT ). A ...

the warning lamp does not light. 1) The plug or the wires are not correctly connected. 2) The warning light is burnt. 1) Check right connection. 2) Replace the light. When pressing start button the machine does not start. 1) Timer is not set or it’s damaged. 2) The safety ...

Table 1 1 3 4 6 7 8 9 10 11 12 13 14 5 16 19 20 21 22 23 25 26 27 28 5 5 18 17 24 29 2 15 ...

Table 2 31 32 33 34 35 37 38 39 40 41 42 43 44 49 50 52 6 53 36 35 18 51 45 46 5 47 19 48 30 54 ...