Planet FRT-401 Quick Installation Manual

FRT-401 / FRT-401S15 / FRT-405 FRT-401N / FRT-401NS15 / FRT-405N Quick Installation Guide ...

1. Package Contents ....................................................................... 3 2. Overview ................................................................................... 4 3. Hardware Installation .................................................................. 8 4. Access Your Fiber Router ............................................................11 5. Further Information .......................................... ...

FRT-40x / FRT-40xN Series Unit x 1 Power Adapter x 1 User’s Manual CD x 1 Quick Installation Guide x 1 Antennas x 2 (For wireless models) If any of above items are damaged or missing, please contact your dealer immediately. l l l l l ...

Front Panel FRT-401 / FRT-401S15 FRT-405 Front Panel LED definition LED State Description PWR ON When the router is powered on, and in ready state. OFF When the router is powered off. WAN Flashing Data is being transmitted or received via the fiber connection. ON The optical fiber connection connected successfully. LAN1-4 Flashing Data is being transmitted or received via the corresponding LAN port. ON The port ...

FRT-405 Rear Panel Port and Button Definition Connector Description 12V DC Power connector with 12V DC, 1.0A RESET Press more than 3 seconds for reset to factory default setting. LAN (1-4) Router is successfully connected to a device through the corresponding port (1, 2, 3, or 4). If the LED light of LNK/ACT is flashing, the Router is actively sending or receiving data over that port. WAN One Fiber-optic Interface, SC or S ...

Front Panel FRT-401N / FRT-401NS15 FRT-405N Front Panel LED definition LED State Description PWR ON When the router is powered on, and in ready state OFF When the router is powered off WPS ON WPS client registration is successful Flashing WPS client registration window is currently open OFF WPS is not available, or WPS is not enabled or initialized WLAN ON WLAN radio is on Flashing Data is being transmitted through WLAN ...

corresponding LAN port ON The port is up Rear Panel FRT-401N / FRT-401NS15 FRT-405N Rear Panel Port and Button Definition Connector Description 12V DC Power connector with 12V DC, 1.0A. RESET Press more than 3 seconds for reset to factory default setting. LAN (1-4) Router is successfully connected to a device through the corresponding port (1, 2, 3, or 4). If the LED light of LNK/ACT is flashi ...

This section describes how to install your Internet Fiber Router and make connections to the Fiber Network. Please read the following topics and perform the procedures in the order being presented. The hardware installation of PLANET Fiber Router do not need software configuration. To install your Fiber Router on a desktop or shelf, simply complete the following steps. In the following steps, terms of Fiber Router will mean the t ...

panel is on accordingly. STEP 3: Connect the PC to LAN port. Check the LAN LED on the front panel is on accordingly Power Adapter PC (DHCP Client or 192.168.1.2) Power Adapter Internet Data VoIP Entertainment Connect the Fiber-optic cable to WAN port. Check the WAN LED on the front panel is on accordingly. The Fiber types of PLANET Wired / Wireless Fiber Router as the following: FRT-401 / ...

Now that the physical connection between your PC and Fiber Router has been established, you must login in order to access Web Management. The Fiber Router supports Web-based configuration. From this chapter, we will describe how to access Web Management of PLANET FRT-40x Series. First Time Login Launch a web browser (for example: IE, Firefox etc.) and type the IP address in the address bar. The default address is “http://19 ...

For further detail configurations and information of Operation Mode, WAN, LAN, Firewall, Fiber/OAM, Wireless can be found in the user’s manual CD. If you have other questions, please contact the local dealer where you purchasing this product. ...