Vacon 10 User Instruction

Text of Vacon 10 User Instruction

1 • vacon

vacon-adp-mcaa adapter Tel. +358 (0)201 2121 • Fax +358 (0)201 212205 vacon adp-mcaa communication adapter for vacon 10, user’s instructions 1. INTRODUCTION VACON-ADP-MCAA communication adapter has two functionalities: 1) It is needed as an adapter between Vacon 10 and the PC cable when Vacon 10 is connected to a computer. 2) The adapter func

vacon • 2

24-hour support +358 (0)201212575 • Email: [email protected] 2. DESCRIPTION OF DIFFERENT PARTS AND THEIR FUNCTIONS Communication adapter external parts I: Figure 1.1: Communication adapter external parts I 1) Communication indicator (green): the indicator blinks when information is being transferred between the MCA adapter

3 • vacon

vacon-adp-mcaa adapter Tel. +358 (0)201 2121 • Fax +358 (0)201 212205 Communication adapter external parts II: Figure 1.2: Communication adapter external parts II 6) RJ-45 connector: Connector for the PC-cable. 7) Connector for the Vacon 10 8) Fitting clamps for attaching the adapter to the drive 9) Connector for external power supply (for futu

vacon • 4

24-hour support +358 (0)201212575 • Email: [email protected] 3. USING THE VACON-ADP-MCAA ADAPTER 3.1 Functionality of the led indicators Figure 1.3: Functionality of the LED indicators COMM ERROR COMM ERROR COMM ERROR Communication LED on (green): Ready state, e.g. data transfer completed Error LED on (red): Fault state, c

5 • vacon

vacon-adp-mcaa adapter Tel. +358 (0)201 2121 • Fax +358 (0)201 212205 3.2 Connecting Vacon 10 to a PC with the MCAA adapter 1 Make sure that Vacon 10 is powered off. 2 Remove the rubber plug covering the connector port of the drive, see below: 3 Connect the MCAA adapter to the drive, see below: 4 Connect the PC cable to the adapter and to your

Vacon Controller Owners Instructions: