Yale HSA3095 Installation Instruction
Text of the manual
An ASSA ABLOY Group brand
Kit 5
Home-monitoring
and intruder alarm system
HSA3095
Installation ¥ Programming ¥ Operating
Keep in a handy place for reference and for future maintenance
Helpline 01902 635998
General system overview
Thank you for choosing the Yale HSA3095
Home-monitoring and Intruder Alarm System. This
simple to install system has been designed with the
user in mind.
Two window stickers are included in the pack.
Please stick them in a front and rear window.
No connections
All the components are self contained and no
connections are
1 Location planning
4
2 Unpack the parts
6
3 Easy install programming
8
4 Installation/mounting
13
5 Testing the system
15
6 Monitoring service
16
7 Using the system
17
8 Configuring your system
20
9 Installing and using accessories
23
Changing the batteries
24
Trouble shooting
25
Specifications
26
Key points
Back cover
HSA3010 Door/windo
Work out the best places to locate the devices for maximum protection. Having chosen
the locations do not mount at this stage.
4
1
Keypad remote control accessory
When used as second keypad, it is ideal in
bedrooms or at the top of a stairwell so the
ground floor can be armed when going to
bed for the night. Or, at a side or back door
for a
¥ Mount on the ceiling at the top of a
stairwell, or where smoke would most
likely be detected.
PIR movement detector
¥ Mount in a position such that an intruder would
normally move across the PIRs field of view.
¥ Height should be between 1.7 and 2.3 metres
above floor level.
¥ Location in a corner will ensure wider room coverage.
¥ Do
Plug the power adaptor into the mains supply
wall socket and the other end into the control unit.
A long beep will be heard
¥ In addition to the adapter, there is a rechargeable
battery inside the control unit that serves as a
back up in case of a power failure. When the
battery is fully charged, it can provide back-up
power for a period of at
1 Remove the cover by loosening the fixing screw.
2 Insert the two AAA batteries as shown.
The indicator will flash briefly.
7
+
+
+
3
A
b
Flood detector
Unscrew the two screws and insert 12V battery.
Note: The detector will not respond to inserting the
battery until the learning in procedure is completed.
To test the detector is working
7 The system asks you for a new PIN code. Think
of one you can remember and key it in. Don�t
forget it, write it in �System records� page 19.
8 Press OK.
9 Confirm by keying in your PIN code again.
10Press OK. If the incorrect code is entered, a
message prompts the previous step.
11The display now offers �Latch Rpt Off� or �Latch
Rpt On� option
¥ When the name is complete, press �OK� to
confirm and return to the previous or main menu.
Note The name can be erased by clearing the
display by entering backward spaces and pressing
�OK�
To delete User PIN code
¥ Except User #1 which is activated by factory
default and can�t be deleted in any way, User #2,
3, 4, 5 and 6 PIN code can be delet