ViewSonic PJD5126 Operation & User’s Manual

IMPORTANT: Please read this User Guide to obtain important information on installing and using your product in a safe manner, as well as registering your product for future service. Warranty information contained in this User Guide will describe your limited coverage from ViewSonic Corporation, which is also found on our web site at http://www. viewsonic.com in English, or in specific languages using the Regional selection box in the upper right corner of our website. “Antes de operar su equipo lea cu idadosamente las instrucciones en este manual� ...

(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed an ...

1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this unit near water. 6. Clean with a soft, dry cloth. 7. Do not block any ventilation openings. Install the unit in accordance with the manufacturer’s instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other devices (including amplifiers) that produce heat. 9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grou ...

This product has been designed and manufactured in compliance with Directive 2002/95/EC of the European Parliament and the Council on restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS Directive) and is deemed to comply with the maximum concentration values issued by the European Technical Adaptation Committee (TAC) as shown below: Substance Proposed Maximum Concentration Actual Concentration Lead (Pb) 0.1% < 0.1% Mercury (Hg) 0.1% < 0.1% Cadmium (Cd) 0.01% < 0.01% Hexavalent Chromium (Cr6+) 0.1% < 0.1% Polybrominated biphenyls (PBB) 0.1% < 0.1% Polybrominated diphenyl ...

Macintosh and Power Macintosh are registered trademarks of Apple Inc. Microsoft, Windows, Windows NT, and the Windows logo are registered trademarks of Microsoft Corporation in the United States and other countries. ViewSonic, the three birds logo, OnView, ViewMatch, and ViewMeter are registered trademarks of ViewSonic Corporation. VESA is a registered trademark of the Video Electronics Standards Association. DPMS and DDC are trademarks of VESA. PS/2, VGA and XGA are registered trademarks of International Business Machines Corporation. Disclaimer: ViewSonic Corpora ...

Important safety instructions .......................2 Introduction......................4 Projector features .................................4 Shipping contents.................................5 Projector exterior view.........................6 Controls and functions .........................7 Positioning your projector..........................12 Choosing a location............................12 Projection dimensions........................13 Connection......................16 Connecting a computer or monitor ....17 Connecting Video source devices......18 Operation........................21 Starting up the projector.............. ...

Your projector is designed and tested to meet the latest standards for safety of information technology equipment. However, to ensure safe use of this product, it is important that you follow the instructions mentioned in this manual and marked on the product. Safety Instructions 1. Please read this manual before you operate your projector. Save it for future reference. 2. Do not look straight at the projector lens during operation. The intense light beam may damage your eyes. 3. Refer servicing to qualified service personnel. 4. Always open the lens shutter or remove the lens cap when the projector lamp is on. 5. In som ...

overheating inside the projector may result in a fire. - Do not place this projector on a blanket, bedding or any other soft surface. - Do not cover this projector with a cloth or any other item. - Do not place inflammables near the projector. 14. Always place the projector on a level, horizontal surface during operation. - Do not use if tilted at an angle of more than 10 degrees left to right, nor at angle of more than 15 degrees front to back. Using the projector when it is not fully horizontal may cause a malfunction of, or damage to, the lamp. 15. Do no ...

design to deliver high reliability and ease of use. The projector offers the following features. • Dynamic PC and Dynamic Movie function adjusting the power consumption of the lamp according to the brightness of the image being projected • Smart Eco function decreasing the power consumption of the lamp by up to 70% when no input signal can be detected for a set period of time. • Presentation timer for better control of time during presentations • Support 3D DLP Link • Color management allowing color adjustments to your lik ...

items are missing, please contact your place of purchase. Standard accessories The supplied accessories will be suitable for your region, and may differ from those illustrated. Optional accessories 1. Replacement lamp 2. Soft carry case 3. VGA-Component adapter Projector Power Cord VGA Cable Multi-language user manual DVD Quick Start Guide Remote Control & Batteries PJD5126/PJD6223 PJD6253/PJD6553w Downloaded From projector-manual.com Viewsonic Manuals ...

1. External control panel (See "Projector" on page 7 for details.) 2. Lamp cover 3. Vent (heated air exhaust) 4. Quick-release button 5. Lens cover 6. Focus and Zoom ring 7. Front IR remote sensor 8. Projection lens 9. Type B USB port 10. RJ45 LAN input port 11. RS-232 control port 12. HDMI port 13. RGB signal output socket 14. RGB (PC)/Component video (YPbPr/YCbCr) signal input socket-1/2 15. S-Video input socket 16. Video input socket 17. Audio signal input socket Audio signal output socket 18. Kensington anti-theft lock slot 19. AC power cord inlet 20. Rear adjuster foot 21. Quick-release foot 22. Security bar Connects a co ...

Projector 1. Focus ring Adjusts the focus of the projected image. 2. Zoom ring Adjusts the size of the image. 3. Keystone/Arrow keys ( / Up, / Down) Manually corrects distorted images resulting from an angled projection. 4. Left/Blank Hides the screen picture. 5. POWER indicator light Lights up or flashes when the projector is under operation. POWER Toggles the projector between standby mode and on. 6. SOURCE Displays the source selection bar. 7. Top IR remote sensor Not available for the PJD5126. 8. MENU/EXIT Turns on the On-Screen Display (OSD) menu. Goes back to previous OSD menu, exits and saves menu settings. 9. Right/ Act ...

keys (Page Up, Page Down, , and ), see "Using the remote mouse control" on page 10 for details. 1. POWER Toggles the projector between standby mode and on. 2. Source selection keys (VGA 1/VGA 2/Video) Selects an input source for display. Video/ Selects Video, S-Video or HDMI source for display. Performs the same function as the right mouse button when the mouse mode is activated. 3. Source Displays the source selection bar. 4. Keystone keys ( / ) Manually corrects distorted images resulting from an angled projection. 5. / / / Selects the desired menu items and makes adjustments. 6. Enter/ Enacts the sele ...

The projector can be assigned to two different remote control codes, A or B. When several adjacent projectors are in operation at the same time, switching the remote control codes can prevent interference from other remote controls. Set the remote control code for the projector first before changing that for the remote control. To switch the code for the projector, select A or B in the SYSTEM SETUP: Advanced > Remote Control Code menu. To switch the code for the remote control, press PgUp and PgDn buttons on the remote control together for 5 seconds or more. The initial code is set to A. If different codes are set on the projector ...

The capability of operating your computer with the remote control gives you more flexibility when delivering presentations. 1. Connect the projector to your PC or notebook with a USB cable prior to using the remote control in place of your computer’s mouse. See "Connecting a computer" on page 17 for details. 2. Set the input signal to D-Sub / Comp. 1, D-Sub / Comp. 2 or HDMI. 3. Press Mouse on the remote control to switch from the normal mode to the mouse mode. An icon appears on the screen to indicate the activation of the mouse mode. 4. Perform the desired mouse controls on your remote control. • To move the curs ...

1. To open the battery cover, turn the remote control over to view its back, push on the finger grip on the cover and slide it in the direction of the arrow as illustrated. The cover will slide off. 2. Remove any existing batteries (if necessary) and install two AAA batteries observing the battery polarities as indicated in the base of the battery compartment. Positive (+) goes to positive and negative (-) goes to negative. 3. Refit the cover by aligning it with the base and sliding it back down into position. Stop when it clicks into place. • Avoid leaving the remote control and batteries in an excessive hea ...

Choosing a location Your room layout or personal preference will dictate which installation location you select. Take into consideration the size and position of your screen, the location of a suitable power outlet, as well as the location and distance between the projector and the rest of your equipment. Your projector is designed to be installed in one of four possible installation locations: 1. Front Table Select this location with the projector placed near the floor in front of the screen. This is the most common way to position the projector for quick setup and portability. 2. Front Ceiling Select this location with t ...

calculating the appropriate position. The "screen" mentioned below refers to the projection screen usually consisting of a surface and a support structure PJD5126/PJD6223/PJD6253 PJD5126/PJD6223 (a) Screen Size [inch (m)] 4:3 image on a 4:3 Screen 16:9 image on a 4:3 Screen (b) Projection distance [m (inch)] (c) Image height [cm (inch)] (d) Vertical offset [cm (inch)] (b) Projection distance [m (inch)] (c) Image height [cm (inch) (d) Vertical offset [cm (inch)] min. max. min. max. 40 (1.0) 1.5 (60) 1.7 (66) 61 (24) 3 (1.2) 1.5 (60) 1.7 ...

16:9 image on a 4:3 Screen (b) Projection distance [m (inch)] (c) Image height [cm (inch)] (d) Vertical offset [cm (inch)] (b) Projection distance [m (inch)] (c) Image height [cm (inch) (d) Vertical offset [cm (inch)] min. max. min. max. 40 (1.0) 1.2 (48) 1.6 (63) 61 (24) 5 (1.8) 1.2 (48) 1.6 (63) 46 (18) 12.2 (4.8) 50 (1.3) 1.5 (61) 2.0 (79) 76 (30) 6 (2.3) 1.5 (61) 2.0 (79) 57 (23) 15.2 (6.0) 60 (1.5) 1.8 (73) 2.4 (94) 91 (36) 7 (2.7) 1.8 (73) 2.4 (94) 69 (27) 18.3 (7.2) 70 (1.8) 2.2 (85) 2.8 (110) 107 (42) 8 (3.2) 2.2 (85) 2.8 (110) 80 (32) 21.3 (8.4) 80 (2.0) 2.5 (97) 3.2 (126) 122 (4 ...

recommended that if you intend to permanently install the projector, you should physically test the projection size and distance using the actual projector in situ before you permanently install it, so as to make allowance for this projector's optical characteristics. This will help you determine the exact mounting position so that it best suits your installation location. (a) Screen Size [inch (m)] 16:10 image on a 16:10 Screen 16:10 image on a 4:3 Screen (b) Projection distance [m (inch)] (c) Image height [cm (inch)] (d) Vertical offset [cm (inch)] (b) P ...