Procomp B683 Operation & User’s Manual

!SPECIFICATIONS..........................................................................1 !POWER OFF CONTROL SOFTWARE .........................................3 !PACKAGING CHECK LIST ..........................................................3 CH2. SETU ...

CPU Bus Speed Pentium® � 66/100 MHz CPU CPU Clock 200MHz ~ 550MHz Memory Subsystem Expandable to 384MB(3 banks) with 168-Pin SDRAM(DIMM) Socket X3 Integrated I / O Two high speed 16550 compatible serial ports, one Multi-Mode Parallel Port fixed SPP/EPP/ECP standard Two PCI ...

CPU/Power Supply /chassis Fan Revolution Detect CPU Fan Control ( the fan will automatically stop when the system enters suspend mode) CPU Overheat Warning(reserved) Chassis Intrusion Detect (reserved) Display Actual Current Voltage Expansion slot Four PCI Master Slots & Two 16-bit ISA Slots Support 3.3/5V PCI bus ...

The motherboard design supports software power off Control feature through the SMM code in the BIOS under Win95 operating system environment. This is INTEL ATX form factor feature and you should use ATX power supply. First, you should connect the power switch cable (provided by the ATX case Supplier) to the Jumper [ JP1 ...

Chapter 2 SETUP GUIDE � � � � � � � ��� �� ��� �� �� ��� �� ��� �� ��� �� ��� � ������� � ��� ����� ��� ������ ������ ����� � � � �� � � ������ ...

� � � � � � � ��� �� ��� �� �� ��� �� ��� �� ��� �� ��� � ������� � ��� ����� ��� ������ ����� � � � �� � � ������ ����� ����� �� ...

Connector Setting KB1- PS/2 Keyboard/ PS/2 Mouse Connector Pin Description 1 Keyboard Data 2 , 6 N.C. 3 Ground 4 +5V 5 Keyboard Clock Pin Description 1 Mouse Data 2 , 6 N.C. 3 Ground 4 +5V 5 Mouse Clock USB1-Universal Series Bus (USB) Connectors USB1 Pin Signal Name USB2 Pin Signal Name 1 USB VCC 0 1 USB VCC 1 2 USB Da ...

Pin Description 1,2,11 + 3.3 V 3,5,7,13,15,16,17 Ground 4,6,19,20 + 5 V 8 POWER GOOD 9 5VSB 10 +12 V 12 -12 V 14 PS-ON 18 - 5 V JP2 – Infrared Connector : IR Pin Signal Name 1 VCC 2 SIRRX 3 GND 4 IRTX JBAT1 – CMOS CLEAR Description Pin Normal (default) 1-2 Clear CMOS 2-3 JWOL1 – WAKE ON LAN Description ...

Pin Signal Name Pin Signal Name 1 Strobe- 14 AFD 2 Data Bit 0 15 Error 3 Data Bit 1 16 INIT 4 Data Bit 2 17 SLCTIN 5 Data Bit 3 18 GND 6 Data Bit 4 19 GND 7 Data Bit 5 20 GND 8 Data Bit 6 21 GND 9 Data Bit 7 22 GND 10 ACK 23 GND 11 Busy 24 GND ...

JSB1 – For Sideband Signals Connector Ex. Creative SB-LINK Connector Pin Signal Name 1 -GNTA 2,5 GND 3 NA 4 -REQA 6 SERIRQ JP3 – OTHER JUMPER SETTING Pin Name Description 1 - 3 Reset Reset buttom 7 - 9 HDD_LED Hard Disk LED 13 - 15 EXT_SMI Suspend mode 19 - 21 SUS_LED Suspend LED 2 - 6 ...