VTech DigiArt Operation & User’s Manual

child. To help prepare preschoolers for this important event, VTech® has developed the Preschool Learning™ series o interactive tos. Preschool Learning™ features fun characters and inviting school themes that use technology to capture a child’s atention and teach important preschool skills like spelling, counting and the alphabet. Tese vital skills are taught in a wa ...

The DigiArt Creative EaselTM transforms into a dry-erase board, chalkboard or drawing table. Using the magic pen, children can follow the blinking lights to draw more than 150 letters, numbers, objects and shapes. They can also explore their creativity and draw anything they want. INCLUDED IN THIS PACKAGE •� One DigiArt Creative EaselTM (assembly required) •� Three�piec ...

16 18 17 9 10 12 14 2 3 7 8 6 5 4 1 13 19 15 PARTS Of THE DIGIART CREATIvE EASELTm 5 MAGIC PEN 2 �DRY-ERASE�BOARD 6 SUPPLIES TRAY 3 LED SCREEN AREA 7 �CHALKBOARD 4 �MAGIC�PEN�HOLDER 8 �BATTERY�COMPARTMENT 9 �ON/OFF�BUTTON 10 �LETTER�BUTTONS 11 �NUMBER�BUTTON 12 �VOLUME�DOWN�BUTTON 13 �VOLUME�UP�BUTTON 14 �MUSIC�ON/OFF�BUTTON 15 �BRIGHTNESS�BUTTON 16 �DRAW�OBJECTS�BUTTON 17�DRAW�SHAPE ...

child play with the toy until it is fully assembled. DRY-ERASE EASEL fORm Step 1: To attach the SUPPLIES TRAY (B) to the CHALKBOARD/DRY-ERASE BOARD (A), use the hooks on the SUPPLIES TRAY (B) to connect it to part A1 of the CHALKBOARD/DRY-ERASE BOARD (A). Step 2: Lift the wide area of part A2 of the CHALKBOARD/DRY-ERASE BOARD (A). Then unsnap t ...

Step 4: Insert two LEGS into part A2 of the CHALKBOARD/DRY-ERASE BOARD (A) and two LEGS into the bottom of the SUPPLIES TRAY (B). The LEGS will lock into place. ASSEmBLY INSTRUCTIONS ...

CHALKBOARD Step 1: Make sure the MAGIC PEN is placed in the MAGIC PEN HOLDER. Step 2: Detach the CHALKBOARD/DRY-ERASE BOARD (A) from the stand by pulling up, turning it over to the chalkboard side and putting it into the stand again. To change the chalkboard back into a dry-erase board, reverse the order of the steps above. TRANSfORmATION INSTRUCTIONS ...

Step 1: Make sure the unit is turned OFF and in DRY-ERASE BOARD mode before transforming. Loosen the center screw by pushing in and turning it counterclockwise. Step 2: Hold the CHALKBOARD/DRY-ERASE BOARD (A) with one hand and with the other hand, move the back legs slowly backwards until the CHALKBOARD/DRY-ERASE BOARD (A) lies horizontally on the four LEGS. TRANSfORmATION INSTRUCTIONS ...

turning it clockwise to fix it in position. Then tighten the left and right screws on the SUPPLIES TRAY (B) by turning them clockwise. The DRAWING TABLE is now ready to use and the LED SCREEN AREA will rotate automatically. TRANSfORm fROm DRAWING TABLE TO EASEL Step 1: Make sure the unit is turned OFF before transforming. Loosen the left and right screws on the SUPPLIES TRAY (B) ...

hand and move the back legs forward with the other hand. Insert A2 into the slot on the back of the SUPPLIES TRAY (B), lining up the hole of A2 with the center screw of the SUPPLIES TRAY (B). Step 3: Tighten�the�center�screw�by�pushing�it�in�and�turning�it�clockwise�to�fix� it in position. GETTING STARTED BATTERY INSTALLATION 1. Make sure the ...

zinc) or rechargeable (Ni-Cd, Ni-MH), or new and used batteries. •� Do�not�use�damaged�batteries. •� Insert�batteries�with�the�correct�polarity. •� ...

•� Do�not�use�sharp�or�pointed�objects�on�the�writing�surface.�Scratching� the board will cause permanent damage. •� Use� non-toxic� dry-erase� markers� only. Do not use washable or permanent marker, crayons, pens, pencils or other drawing tools to draw on the board surface. CHALKBOARD •� Use�the�chalk�to�draw�on�the�chalkboard. •� Wipe�with�a�slightly�da ...

�to�learn�how�to�write�that�letter.�Follow� the voice instructions and use the MAGIC PEN to trace the blinking lights to learn how to write the letter. WRITE NUMBERS Press the NUMBER BUTTON to see the number-selection menu. Press the LEFT or RIGHT ARROW BUTTONS to choose a number and press the OK BUTTON .�Follow�the�voice�instructions� and use the MAGIC PEN to trace the blink ...

to play the next song. •� Press�the�OK BUTTON or FREE DRAW BUTTON to clear the screen. PAPER CLIP Insert a piece of paper into the PAPER CLIP and start drawing. If you would like to listen to the music while drawing, turn on the unit and press the FREE DRAW BUTTON. VOLUME Press the VOLUME UP BUTTON to make the volume louder, press the VOLUME DOWN BUTTON to make the volume quieter. SCREEN BRIGHTNESS Pr ...

not�turn�ON. 1. Reload the batteries to reset the unit. Please refer to Battery Replacement section for the instructions. 2. Batteries may be exhausted, please replace with a new set of batteries. The unit gives an incorrect response. 1. Batteries may be exhausted, please replace with a new set of batteries. 2. Humidity may cause interference with the unit. Please be sure the unit is in a dr ...

a�Class�B�digital�device,�pursuant�to�Part�15�of�the�FCC�Rules.�These� limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmf ...

PRODUCT WARRANTY This Warranty is applicable only to the original purchaser, is non-transferable and applies only to “VTech” products or parts. This product is covered by a 3-month Warranty from the original purchase date, under normal use and service, against defective workmanship and materials. This Warranty does not apply to (a) consumable parts, such as batteries; (b) cosmetic damage, includin ...