Sony CCP-8000 Series System Setup Manual

1st Edition MULTI FORMAT SWITCHER SYSTEM MVS-8000 System MVS-8400/8300/8200 SWITCHER PROCESSOR PACK MVE-8000 DME PROCESSOR PACK DCU-8000 DEVICE CONTROL UNIT PACK CCP-8000 CENTER CONTROL PANEL PACK ...

To reduce the risk of electric shock, fire or injury, do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so. Refer all servicing to qualified service personnel. ! WARNUNG Die Anleitung ist nur f ...

1. System Overview 1-1. Introduction .................................................................................................1-1 1-2. Features .......................................................................................................1-1 1-3. System Description ............................ ...

3-3. IP Address ................................................................... ...

sion signal capability, advanced networking and layout-free control panels. The MVS-8000 system includes SD/HD simulcast, multiple frame rates and resolutions, multi-channel casting and ...

Pack (MVE-8000), Center Control Panel Pack (CCP-8000) and Device Control Unit Pack (DCU-8000). 1-3. System Description MVE-8000 DCU-8000 MVS-8400/8300/8200 AUX PANEL MENU PANEL MIAN PANEL POWER A SYSTEM CONTROL ...

External dimensions of MVS-8000 577.9 400.1 177.8 65.1 375 708(16U) 465 482 440 35 27 61 380 520 1-3. System Description Unit : mm ...

and both sides of the frame, and an air filter on the rear of the front panel. Cooling air is drawn in at the front side of the frame, through the filter, boards, and modules, and then expelled out the rear and both sides ...

standard/option boards. n The MVS-8000 is shown below with the front panel removed. The front panel must remain in place and closed during normal system operation to keep maximum cooling efficiency. 3 2 1 32 Slots on the ...

Power, control, and video connectors are at the rear chassis of MVS-8000. The illustration below shows a full loaded rear board. Some of the modules shown below are optional and may not be included in your system configuration. GPI connector TERMINAL connector REMOTE 1 to 4 connectors AC IN A, B, C ...