Wintec LP-802 Operation & User’s Manual

manufactured by Wintec Co., Ltd. Based on the ever-changing innovative technology, we have been able to develop many different wireless products that have gained widely consumers' affection. We even wish you to be attentive to new product information. Please read through the manual carefully to understand the features of this model. Wide frequency coverage. 128 programmable channels an ...

not permitted or will lose license. Use is prohibited at restricted environment declared by authority, during flight, highly-explosive area like near mining areas. Avoid storing in high temperature or humid place for long time. Turn to lowest volume if external Mic/Speaker is used, then adjust appropriately. If strange smell or smoke comes off from radio, dispatch to service cen ...

LCD Icons..................................................................2 Basic Operation.........................................................3 Function Settings and Operation...............................4 Low Battery Warning.................................................5 Introduction to Programmable Functions..................6 Installation on Battery................. ...

LED Indicator External Speaker / Mic Jack Programmable Jack Speaker Mic LCD Monitor Down Button Set Keypad Up Keypad Programmable Keypad P1 Programmable Keypad P2 (Push-to-talk) PTT Button Programmable Keypad P3 Antenna Volume Control / Power Control ...

Output Power Indicator VOX Indicator Compandor CTCSS / DCS Code Scramble BCLO Talk Around Dual Channel Watch Noise Cancel Indicator Keypad Lock Power Saving Mode Battery Power Level ...

Rotate the Power switch / volume control knob clockwise to switch power ON. When the click sound of switch and the melody is heard, the transceiver is powered. Rotate the Power switch / Volume control knob counterclockwise to switch power OFF. When the click sound of switch is heard, transceiver's power is turned off. 1. 2. Receiving / Transmitting Rotate the Channel Control knob to the desired channel, press and hold PTT b ...

When the icons are flashing on the sceen. Press button in times to scroll over the functions. When enter the selection. Momentarily press or key to change the settings on the selection. Press PTT to enable it and return to the main page. The keypad lock function can be programmed on button by software if needed. 4 TX Power Adjustment [TX POWER] VOX ON The Screen will indic ...

There will be shown on the screen when enabling the Noise Cancel Enable the Noise Cancel can elevate the efficiency on the voice quality in communication by reducing the background noise. 1. 2. ★ The factory default is ON. Low Battery Warning When battery is going to be exhausted, it will remind you by flashing and the power output will automatically change to low. By the time battery is exhausted, radio will ...

HIGH. TOT TIME OUT TIMER is selectable to be OFF, 30, 60, 90, 180, 360 sec. BCLO BCLO is selectable to be OFF / BCL / BTL. VOX VOX TX is selectable to be OFF or SENSITIVITY from L0~L9. Scrambler Selectable from 0~9. the “0” means to turn off this function. Compandor Setting compandor “On” can enhance the quality of voice in communication. 6 Introduction to P ...

WPS-800(PC software), the device name will appear on the software. SQL The setting ranges from L0~L9. Noise Cancel 0: Disable / 1:Normal / 2:Strong Key Beep Selectable to be ON or OFF. Roger Tone Selectable to be ON or OFF. If it is ON, it will send out beep sound when finish the transmitting. Disable Function Menu To select this function, the func ...

Programmable Key P1 ~P3 functions are operable only by dealers. It is not intended for use by general consumers. The the functions for P1 ~P3 can be defined separately in long or short press on the buttons. The Factory Default on programmable keys: P1in long press: No use, short press: Noise Cancel P2 in long press: Monitor, short press: Backlight P3 in long press: No use, short press: Low and High P ...

1. Backlight Press the button to enable the backlight and press it once to turn off the backlight. 2. DW (Dual Watch) Press this button to switch the present channel with priority channel. Press it once to restore to the present channel. 3. TA (Talk Around) The setting on transmission channel will change to the same as the receiving channel, including the frequency. 4. Scan Channe ...

battery upward when the click sound of switch is heard, it will lock into compartment. Installation on Battery Holding radio in one hand, push down battery latch on the button. Slide battery pack backwards until the battery is apart from the radio unit. 1. 2. ...

Charging of Battery Power drop-in charger with standard AC/DC wall charger. Drop in radio installed with battery into the battery-with-radio slot. Spare battery pack into the battery-only slot. Each LED light individually indicates charging slot in process. LED flash in green when battery in slot is fully charged. Remove accessory jack cover. Insert accessory jack. Fix accessory with the screws. 1. 2. 3. ...

50Ω BT 90LI 1350mAh BT 90LI 2200mAh 7.4V -30 ~ +70℃ 270g With Antenna & Battery 125(H)×53(W)×43(D)mm without antenna 12 Specifications General Transmitter Receiver Frequency Range Channel Spacing Programmer Channel Number Frequency Stability Sub-Audio Type Antenna Impedance Battery Type Power Voltage Range Temperature Range Weights Dimensions Max RF Power (@ DCV) Modulation(W/N) ...

BT FR 90LIs 7.4V/1350m AhLi-ion battery BT FR 90LI 7.4V/2200m AhLi-ion battery LP-20A Earphone headsets LP-20B Earphone headsets LP-20C Air-tube headsets LP-10M Belt clip swivel belt clip for best placement and take-out the radio LP-84L Belt clip swivel belt clip for best placement and take-out the radio LP-CHG 90 Desktop rapid charger ANT 80 UHF M ANT 80 VHF M ANT 80 UHF L ANT 80 VHF L ANT 8 ...