Zotac ZBOX series Operation & User’s Manual

be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission o ...

Product Specifications ----------------------------------------------------------------------------------------3 Safety information ----------------------------------------------------------------------------------------------4 Setting up your system ------------------------------------------------------------------------------ ...

v Intel Core i5-6400T (quad-core, 2.2 GHz, up to 2.8 GHz) q Operating systems: v Supports Windows 8.1 / 10 32/64-bit q System Memory support v Two DDR3L-1600/1333 SODIMM slots v Up to 16 GB of memory q USB Ports v Three USB 3.0 ports (including one combo USB 3.0 / Mem ...

technology equipment. However, to ensure your safety, it is important that you read the following safety instructions. Setting up your system � Read and follow all instructions in the documentation before you operate your system. � ...

contents of your new ZOTAC ZBOX. If any of the below items is damaged or missed, contact your retailer. Package contents • 1 x ZOTAC ZBOX • 1 x AC Adapter • 1 x Power Cord • 1 x Antenna • 1 x Supp ...

Front view Refer to the diagram below to identify the components on this side of the system 1. Power switch The power switch allows powering ON and OFF the system. The ring LED can be disabled in BIOS setting. 2. Combo USB 3.0 port / Memory card slot The Combo USB 3.0 port / Memory card slot is compatible with USB ...

1. Power input (DC19.5V) The supplied power adapter converts AC power to DC power for use with this jack. Power supplied through this jack supplies power to the PC. To prevent damage to the PC, always use the supplied power adapter. 2. USB 2.0 ports Th ...

Before installing hardware, please follow the instructions below to remove the cover of your ZOTAC ZBOX. 1. Remove the two rear thumb screws. 2. Gently remove the cover as shown below. ...

1. Locate the SO-DIMM memory slots and insert a SO-DIMM memory module into the slot at a 45 degree angle. 2. Gently press down on the memory module until it locks into place by the arms of the memory slot. Note: 1. This ZOTAC ZBOX accomodates two DDR3 SO-DIMM memory modules. You must install at least one ...