Fujitsu Impact 3650 Maintenance Manual
Text of the manual
FUJITSU ISOTEC LIMITED
FUJITSU ISOTEC LIMITED Proprietary Confidential
Specification No. P1KA02038-B112/E
The contents of this manual may be revised without prior notice.
All Rights Reserved, Copyright © 2007 FUJITSU ISOTEC LIMITED.
No part of this manual may be reproduced in any form without permission.
PREFACE
This manual is for engine
CHAPTER 1 PRINTER SPECIFICATIONS, PERFORMANCE, AND CONFIGURATION......................7
1.1 Overview................................................................................................
4.5 Preventive Maintenance ...............................................................................................................35
4.6 Part Drawings ...............................................................................................................................35
4.7 Parts That must not be Disassembled .............................
(36) Ribbon Rope ASY replacement............................................................................................78
(37) Card Guide ASY replacement ..............................................................................................79
(38) TOFL/R sensor ASY replacement ...................................................................
5.2.2.1 Paper path selection mechanism (HCPP)......................................................................123
5.2.2.2 Paper feed operation .....................................................................................................125
5.2.2.3 Paper loading and ejection operation (auto loading)..............................................
CHAPTER 1 PRINTER SPECIFICATIONS,
PERFORMANCE, AND
CONFIGURATION
1.1 Overview
This manual is for maintenance engineers, and covers overall this impact 3650 printer maintenance, together
with detailed information such as troubleshooting and component replacement.
Recommended references are:
Impact 3650 Printer Parts Catalogue
(P3KA02038-B112/E)
Impact 3650
Major printer components are organized as shown below. Items in boldface are recommended spare parts
(see Chapter 6) that can be replaced in field by maintenance service engineers. Replacement and adjustment
are detailed in Chapter 4.
Figure 1.1 Structure of the impact 3650
Impact 3650 printer
Stacker Unit
Mecha assembly
Ribbon cartridge
Tr
The following figure shows printer functional components and connecting cables.
Figure 1.2 Block Diagram of the impact 3650
Power supply
ROM Board
Control Panel
sw
inlet
Carrier board
LF
Motor
Print Head
TR
Motor
Connector board
SP
Motor
PS
sensors
HCPP
motor
HCPP HP
SW
APTCHP
SW
APTC
motor
FTRPE
sensor
RTRPE
sensor
FCSF
RCSF
connector
INTER