Regency MODEL L Installation And Operation Instructions
Text of the manual
Fireplace Remote Control
Installation and Operation Instructions:
The Model L Remote Control is designed for use with decorative gas fireplace and wall heaters
using Millivoit gas valve.
The Model L Transmitter is a six-button hand held transmitter, which turn the gas on/off or as a thermostat.
The display of the t
1.0 Installation Instruction
1.1 Installing the Receiver
WARNING: TURN ELECTRICAL POWER OFF AT THE CIRCUIT BEAKER BEFORE BEGINNING THIS
INSTALLATION.
1. Make sure the slide switch on the Remote Receiver is at the OFF position. See Figure 1.
2. Connect the leads to the millivolt generator and the main burner to the output cable of the Remote
R
7. In order to prevent the Remote Receiver (fireplace installation only) from overheating, put a heat
shield (option item) above the Remote Receiver. See Figure 6.
2.0 Operation Instructions:
2.1 Transmitter Operation
The Model L Remote Control has 3 operating modes. They are: Manual, Auto and Timer.
Use the Up and Down buttons to set the target temperature
1. In the On mode the Receiver will turn on the fireplace.
2. The Receiver will not respond to the Transmitter and turn the fireplace on and off.
B.
Remote Mode
1. The Receiver will respond to the Transmitter and turn the fireplace on and off.
2.3 Changing Batteries
1. Slide the slide switch to Off position.
2. Press the battery com
