RCF DPS 604X Operation & User’s Manual

Text of the manual

TABLE OF CONTENTS

INDICE ENGLISH SAFETY PRECAUTIONS DESCRIPTION UNPACKING AND INSTALLATION FRONT PANEL REAR PANEL OPERATION MODES COOLING REQUIREMENTS SPECIFICATIONS ITALIANO AVVERTENZE PER LA SICUREZZA DESCRIZIONE DISIMBALLO ED INSTALLAZIONE PANNELLO FRONTALE PANNELLO POSTERIORE MODI DI FUNZIONAMENTO VENTILAZIONE DATI TECNICI 4 6 6 7 8 10 14 14 16 18 18 19

Before connecting and using this product, please read this instruction manual carefully and

keep it on hand for future reference. The manual is to be considered an integral part of this product and must accompany it when it changes ownership as a reference for correct installation and use as well as for the safety precautions. RCF S.p.A.

8. Do not connect this product to any equipment or accessories not foreseen.

For suspended installation, only use the dedicated anchoring points and do not try to hang this product by using elements that are unsuitable or not specific for this purpose. Also check the suitability of the support surface to which the product is anchored (wall, ceiling

RCF S.P.A. THANKS YOU FOR PURCHASING THIS PRODUCT, WHICH HAS BEEN

MADE TO GUARANTEE RELIABILITY AND HIGH PERFORMANCE. DESCRIPTION UNPACKING AND INSTALLATION DPS 604X is a 4-channel class D power amplifier designed for professional use in installed sound systems. It is compact (19” rack - 1 unit) and lightweight. Its nominal output power is 230 W

1 POWER switch: it switches the amplifier on / off.

Before switching the amplifier on, check all cables and turn fully counterclockwise all the four channel level controls 3 . 2 POWER LED: when lit, the amplifier is switched on. 3 Controls (one per channel) to adjust the output level of the respective amplifier channels. Turn clockwi

INPUT EUROBLOCK CONNECTORS

audIo Inputs can Be connected to the euroBlock sockets By usIng the supplIed female connectors. Balanced connectIon pIns: + (hot), – (cold), G (ground). UnBalanced connectIon pIns: + (hot), G (ground). 7 CHANNEL A BALANCED AUDIO INPUT 8 CHANNEL B BALANCED AUDIO INPUT D

DUAL EUROBLOCK CONNECTORS FOR SPEAKERS

The upper and the lower terminals are linked together (internally, in parallel), so these can be used interchangeably (or both, when connecting more speakers to each channel). Pins: + positive, – negative. When channels A-B are bridged (mode 3), A+ is the positive and B+ is the negative. When channels C-D ar

MODE 1: FOUR INDIPENDENT CHANNELS

All the four channels are completely independent (each channel input is only sent to its respective speaker output). Each front panel level control only affects its respective speaker output. Minimum load impedance is 2 Ω per speaker output. A min. 2Ω C min. 2Ω B min. 2Ω D min. 2Ω + - + -

Other Amplifier Manuals