4IPNET HSG1250 Quick Installaion Manual

HSG260 Wireless Hotspot Gateway ENGLISH Copyright © 4IPNET, INC. All rights reserved. i Copyright Notice This document is protected by USA copyright laws and other laws. Besides, the document is the property of 4IPNET, INC. You may not copy, reproduce, distribute, publish, display, perform, or modify any part of this publication in any form or by any means without prior written permission from 4IPNET, INC. You may not alter or remove any copyright or other notice from copies of the content. All other brand and product names are claimed or registered marks of their respective companies or organizations. All rights reserved. To ...

HSG260 Wireless Hotspot Gateway ENGLISH Copyright © 4IPNET, INC. All rights reserved. ii FCC CAUTION This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and proven to comply with the limits for a class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. Th ...

HSG260 Wireless Hotspot Gateway ENGLISH Copyright © 4IPNET, INC. All rights reserved. iii CE CAUTION Declaration of Conformity with Regard to the 1999/5/EC (R&TTE Directive) for European Community, Switzerland, Norway, Iceland, and Liechtenstein Model: HSG260 For 2.4 GHz radios, the device has been tested and passed the requirements of the following standards, and hence fulfills the EMC and safety requirements of R&TTE Directive within the CE marking requirement. • Radio: EN 300.328: • EMC: EN 301.489-1, EN 301.489-17, • EMC: EN 55022 Class B, EN 55024:+ A1 + A2 including the followings: EN 61000-3-2, EN 61000-3-3. ...

HSG260 Wireless Hotspot Gateway ENGLISH Copyright © 4IPNET, INC. All rights reserved. Preface The HSG260 is the most economical and feature rich Wireless Hotspot Gateway, targeting mini-size stores that want to provide small, single-point wireless Internet access service. HSG260 is a perfect choice for beginners to run hotspot businesses. It does not cost much compared to buying a pile of equipments, nor does it take the skills of an expert to glue multiple applications out of multiple freeware. Feature-packed for hotspot operation, HSG260 comes with built-in 802.11 n/b/g MIMO access point, web server and web pages for clients ...

HSG260 Wireless Hotspot Gateway ENGLISH Copyright © 4IPNET, INC. All rights reserved. System Overview Front Panel 1 Quick-Print button Press this button to create an on-demand account from billing plan 1 and print out through console. (Need to work with a POS printer connected via console port.) 2 WES button Press and hold over 5 seconds to initiate Master WES process. Press and release to initiate Slave WES process. 3 Power LED On indicates power on. 4 Status LED On indicates the system ready. 5 Wireless LED On indicates wireless network interface is ready for service. 6 WAN LED On indicates that WAN uplink connected. 7 LAN1 ...

HSG260 Wireless Hotspot Gateway ENGLISH Copyright © 4IPNET, INC. All rights reserved. Rear Panel 1 Antenna connector Reverse SMA connectors for attaching antenna as shown in figure 2. 2 WAN For attaching an Ethernet cable to an uplink service. 3 LAN 1- 4 Attach Ethernet cables here for connecting to the wired local network. 4 USB 2.0 Reserved for future use. 5 Console Attach the serial cable here to access console interface. 6 5V 2 A Attach the power adapter here. 7 Restart / Reset Press once to restart the system; Press and hold for more than 5 seconds to reset to factory default. Right-Side Panel There is a hole on the righ ...

HSG260 Wireless Hotspot Gateway ENGLISH Copyright © 4IPNET, INC. All rights reserved. 4 Hardware Installation Please follow the steps mentioned below to install the hardware of HSG260: 1. Place the HSG260 at a best location. The best location for HSG260 is usually at the center of your wireless network. 2. To supply power over to HSG260. (a) Connect the DC power adapter to the HSG260 power socket on the front panel. Please only use the power adapter supplied with the HSG260 package. Using a different power adapter may damage this system. 3. Connect HSG260 to your outbound network device. Connect one end of the Ethernet cable t ...

HSG260 Wireless Hotspot Gateway ENGLISH Copyright © 4IPNET, INC. All rights reserved. Getting Started HSG260 supports web-based configuration. Upon the completion of hardware installation, HSG260 can be configured through a PC by using its web browser with JavaScript enabled such as Internet Explorer version 6.0. Default LAN interface IP address: LAN1 & LAN2 (192.168.1.254) are mapped to Private Zone, no authentication required for users. LAN3 & LAN4 (192.168.11.254) are mapped to Public Zone, authentication required for users.  Note: The instructions below are illustrated with the administrator PC connected to LAN1. Steps: ...

HSG260 Wireless Hotspot Gateway ENGLISH Copyright © 4IPNET, INC. All rights reserved. 4. The Home Page will appear after a successful login.  Note: To logout, simply click Logout at the upper right hand corner of the interface to return to the Administrator Login Page. 6 ...

HSG260 Wireless Hotspot Gateway ENGLISH Copyright © 4IPNET, INC. All rights reserved. 7 Common Settings < Setup Wizard > HSG260 provides a Setup Wizard for quick configuration. To quickly configure HSG260 by using the Setup Wizard, click on the Setup Wizard button to start the configuration process. Step 1. General  Enter a new administrator’s password in the New Password field, and re-enter it again in the Verify Password field (a maximum of 20 characters and no spaces allowed in between).  Select an appropriate time zone from the Time Zone drop-down list box and enter the URL of a valid NTP server to set up the syste ...

HSG260 Wireless Hotspot Gateway ENGLISH Copyright © 4IPNET, INC. All rights reserved. 8 For security concern, it is strongly recommended to change the administrator's password. HSG260 supports NTP time synchronization. If NTP is the option selected, it is strongly recommended to make sure the NTP server is reachable and alive. Step 2. WAN and Wireless Interfaces For setting up both wired WAN and Wireless LAN interfaces:  Select a proper type of Internet connection for WAN interface from the following three available connections: Static, Dynamic, or PPPoE. Your ISP or network administrator can advise on the connection type a ...

HSG260 Wireless Hotspot Gateway ENGLISH Copyright © 4IPNET, INC. All rights reserved. 9  Click Wireless radio button.  Select desired wireless Band, Channel, and ESSID for public zone.  Click Next to continue.  Note: HSG260 supports two Virtual Access Points, one under Private zone and one under Public zone, with ESSID “HSG260-1” and “HSG260-2” respectively by default. The ESSID for VAP under Private is not broadcasted by default. Detailed configurations for these two VAP can be performed under Main Menu >> System >> Zone Configuration. ...

HSG260 Wireless Hotspot Gateway ENGLISH Copyright © 4IPNET, INC. All rights reserved. 10 Step 3. Authentication Settings for Public Zone  For public zone (by default, authentication is enabled), authentication can be enabled or disabled. Clients shall log in the system before using network service if Auth Required is enabled. When authentication is enabled, a default authentication server shall be configured. HSG260 supports 4 kinds of authentication servers including Server 1 (LOCAL), Server 2 (RADIUS), Server 3 (RADIUS), and On-demand (ONDEMAND).  By default, the Default Auth Server is ONDEMAND.  Use default or set ...

HSG260 Wireless Hotspot Gateway ENGLISH Copyright © 4IPNET, INC. All rights reserved. 11  ...

HSG260 Wireless Hotspot Gateway ENGLISH Copyright © 4IPNET, INC. All rights reserved. 12  After you have printed out the ticket or noted down the Username and Password information. Close the account information window, return to Setup Wizard and click Next to continue.  Note: 1. HSG260 supports four authentication servers, with internal authentication databases (LOCAL、ONDEMAND) and external authentication databases (RADIUS). 2. The complete name format is userid@postfix. Userid is the username and postfix is used by the system to determine the authentication server. 3. For hotspot deployments, it is recommended to use ...

HSG260 Wireless Hotspot Gateway ENGLISH Copyright © 4IPNET, INC. All rights reserved. 13  A Confirm and Restart message will appear on the screen during the restarting process. Please do not interrupt the system until the Administrator Login Page appears.  Note: The system is trying to locate a DNS server at this stage. Therefore, a longer startup time is required if the configured DNS cannot be found.  When the following Administrator Login Page appears, it means the restart process is now completed. ...

HSG260 Wireless Hotspot Gateway ENGLISH Copyright © 4IPNET, INC. All rights reserved. 14 < User Login > To verify whether the configuration of the new on-demand user account(s) created via the Setup Wizard has been completed successfully: 1. Connect a client device (e.g. laptop, PC) with wireless interface to scan the configured ESSID of HSG260 (e.g. “HSG260-2”) and get associated with this ESSID. 2. The client device will obtain an IP address automatically via DHCP from HSG260. Open a web browser on a client device, access any URL, and then the default User Login Page will appear. 3. Enter the Username and Password of an ...

HSG260 Wireless Hotspot Gateway ENGLISH Copyright © 4IPNET, INC. All rights reserved. 15 Congratulations! The Login Success Page will appear after a client has successfully logged into HSG260 and has been authenticated by the system. The appearance of Login Success Page means that HSG260 has been installed and configured properly.  Note: Please be noticed that closing Login Success Page will force clients to log out HSG260. ...

HSG260 Wireless Hotspot Gateway ENGLISH Copyright © 4IPNET, INC. All rights reserved. Deployment Example < Small Hotspot Network Environment > Nowadays, wireless network service is common and popular in a hotspot network environment. HSG260 provides wireless network service with authentication required for clients in Public Zone. Wireless clients in the Public Zone and Private Zone are isolated from other wireless clients within the same zone when Station Isolation feature is enabled. Using wireless instead of wired service helps hotspot owners to build network service quickly. HSG260 supports two zones, Private and Public. In ...