Abus SECVEST Installer Manual

abus.com V2.01.08 1 4 7 * 2 5 8 0 3 6 9 # 1 4 7 * 2 5 8 0 3 6 9 # ...

zur Inbetriebnahme und Handhabung. Achten Sie hierauf, auch wenn Sie dieses Produkt an Dritte weitergeben. Eine Auflistung der Inhalte finden Sie im Inhaltsverzeichnis mit Angabe der entsprechenden Seitenzahlen. Deze gebruiksaanwijzing hoort bij dit product. Er staan belagrijke aanwijzingen in betreffende de ingebruikname en gebruik, ook als u dit product doorgeeft aan derden. U vindt een opsomming van de inhoud in de inhoudsopgave met aanduiding van de paginanummers. English Dansk These user manual contains important information for installation and operation. This shou ...

Contents ........................................................................................................................................................................... 3 Quickstart guide .............................................................................................................................................................. 6 Target audience ........................................................................................... ...

External Sirens ......................................................................................................................................................... 53 Info module/indoor siren ........................................................................................................................................... 55 WUM (Wireless Universal Module) ............................................................................................................. ...

Test .............................................................................................................................................................................. 156 Log ............................................................................................................................................................................... 172 Virtual keypad ............................................................................................... ...

individual menus of the program interface. These instructions are aimed at trained technicians that have taken an ABUS Security-Center GmbH & Co. KG seminar and acquired the necessary fundamental knowledge about the following:  Installing the wireless alarm system.  Installing peripheral devices for the wireless alarm system (e.g. detectors, sirens, GSM/GPRS module, surveillance cameras).  Configuring peripheral devices for the wireless alarm system These instructions for installers provide an overview of the setting options in the ind ...

The following symbols are used in this manual and on the device: The following conventions are used in the text: Meaning 1. … 2. … Required action to be carried out in a set order  …  … List without a set order, given either in the text or warning notice Intended use Only use the device for the purpose for which it was built and designed! Any other use is considered unintended. This device may only be used for the following purpose(s):  intruder alarm system, alarm system. General Before using this device for the first time, please read the following instructions carefully ...

systems should be known only by the legal owners and never given out to unauthorised parties.  If you have to pass this information on via email, please take care to send the user name and code in two separate emails.  User names and codes should be changed regularly. Standards  User names must be at least eight characters long.  They should ideally contain characters from at least three of the following categories: uppercase letters, lowercase letters, special characters, and numbers.  User names should never contain your own name, the name of a family memb ...

and ensure that lines and components used are labelled precisely when the system is installed. Wireless operation Note No wireless licence is required for Secvest and its components. The send/receive properties could be affected by other signals (e.g. DECT telephones). The wireless devices in this system have been tested by an independently accredited laboratory for RED Directive 2014/53/EU or for R&TTE certification. Mounting location of the alarm panel Note The alarm panel should be positioned in a safe place out of sight of possible intruders and easily accessible to the operat ...

5 Arm button Monitoring of all available areas is activated (device armed). 2 Confirmation buttons Used to navigate to a higher/lower menu level or to select options or to exit a menu 6 Disarm button Monitoring is deactivated (device disarmed). 3 Navigation buttons Used to navigate up/down 7 Proximity reader Reader for the proximity keyfob. Hold the keyfob in front of the ABUS logo. 4 Internal arm button Perimeter monitoring is activated (device armed internally). ...

No. Name/function No. Name/function 1 Mounting opening for screws 8 Connection for LAN cable 2 Housing tamper switch 9 Connection for mains voltage 110 V/230 V AC 50/60 Hz 3 Code reset PINs , see note below 10 Micro SD card holder 4 Connection for optional GSM module (FUMO50000) 11 Fuse holder for mains fuse 5 Connection for ribbon cable 12 Holes for plastic holder for optional GSM module 6 Connections for battery pack 13 USB mini-B 7 Analogue telephone connection Note Code reset PINs If user 1 and/or installer codes are no longer known, all user settings can be deleted. All users, all proximity tags, all ...

Note: If you cannot go into installation mode, the alarm panel will sound a tampering alarm when you open the housing. 2. Open the housing. Disconnect the entire power supply (mains voltage and batteries). Note: This procedure will not work if the tamper switch on the cover is closed. 3. Identify the reset code PIN on the motherboard (see illustration above). 4. Shortly close both of the reset code PINs. Use a screwdriver or jumper to do so. Leave the short circuit until step 6. 5. Reconnect the mains voltage. After a short pause, the system will start. The alarm panel will now delete all user ...

Access level 1-4 Access level 1-4, also known as level 1-4, In accordance with EN50131-1 Section 8.3.1 EN50131-3 Section 8.3.1 EN50136-2 Section 5.2 EN50136-3 Section 6.2 Access level 1 Access for all Access level 2 User access, e.g. via a controller Access level 3 User access, e.g. via personnel from a security company Access level 4 User access, e.g. via the device manufacturer Note: In the event of changing operating software, access level 4 is applied, without activating a tampering device on the alarm control panel or the additional operating device. Active intrusion protection Even an attempt to ...

Ensures secure transmission of signals without manipulation or tampering between the alarm panel and its components. Combination signalling device Combined sounder, e.g. siren (acoustic signal) + strobe (visual signal). Communication options Used to transmit alarm notifications using additional routes, e.g. wirelessly (GSM module) for voice/text messages or digital protocols. Components See system components Contact ID, CID Protocol for transmitting data to an ARC (alarm receiving centre). Danger alarm system, danger alarm system Alarm system that triggers an alarm for additional dangers/emergencies as well as ...

protocol on the web, used to transfer data securely. HTTPS is used online to establish confidentiality and integrity in communications between web server and web browsers (clients). This is achieved through encryption and authentication. Without encryption, data transmitted over the internet can be read as plain text by anyone who has access to the corresponding network. IMEI International Mobile Station Equipment Identity, a unique 15-digit serial number which can be used to uniquely identify each GSM or UMTS end device. IMSI International Mobile Subscriber Identity, used in GS ...

garage door, etc. is opened. Outdoor siren Sounder for outdoor use, usually designed as a combination sounder (siren + strobe). Overlapping signal See jamming. Partitions An alarm system can be divided into sub-areas (partitions), each of which functions separately as an individual alarm system. Each sub-area (e.g. apartment, workshop) can be operated and configured separately and can contain any number of zones/detectors. Perimeter protection All points of access to the premises are monitored, including house doors, terrace doors, cellar doors, skylights and all ...

Swiss National Frequency Assignment Plan (NaFZ) and published by the Federal Office of Communications Seismic sensor See shock detector. Server A program that waits for contact from a client in order to perform a certain service. SHA SHA-2 (secure hash algorithm) is the general term for the four cryptological hash functions, SHA-224, SHA-256, SHA-384 and SHA-512, which were standardised in 2001 by the American NIST as a successor to SHA-1. Shock detector This detector identifies vibrations that occur when an attempt to break in is made. SIA Protocol for transmitting data to an ARC (a ...

Supervision The alarm panel monitors whether detectors are present and active. The components report approx. every 4 min. The alarm panel responds if it fails to receive status messages over a longer period of time. TAE The Telekommunikations-Anschluss-Einheit (telecommunications connection unit) is a type of connector used in Germany for telephone connections. It is used as a connection to the public telephone network or as an a/b interface for analogue telephone connections to additional devices. Tampering, tampering protection, sabotage So that the alarm panel and its co ...

For convenient arming/disarming of the alarm panel, status query, emergency alarm, etc. regardless of the user’s location. Wireless window lock/wireless door lock Combination of mechanical lock and electronic detector. Pry-attempt monitoring is also possible. i.e. even attempts to break in are detected. Zone Another term for a line. Describes a closed circuit to which alarm or tamper contacts are connected, which are then connected to the alarm panel. With wireless zones usually one zone is used per detector. ...