ADL S15PC Manual 

Text of ADL S15PC Manual 

Advanced Digital Logic GmbH, Eiserfelder Str. 316,

Advanced Digital Logic, Inc. 4411 Morena Blvd., Suite 101 57080 Siegen, Germany San Diego, CA 92117-4345 P. +49 (0) 271 250 810 0 F. +49 (0) 271 250 810 20 P. +1 858 490-0597 F. +1 858 490-0599 e-mail: [email protected]; web: http://www.adl-europe.com e-mail: [email protected]; web: http://www.adl-usa.com ADLS15PC Manual rev. 1.4

Advanced Digital Logic ADLS15PC

page 3 Contents 0 Document History ........................................................................................................................... 5 1 Introduction..................................................................................................................................... 6 1.1 Important Notes.........................................................................................
Advanced Digital Logic ADLS15PC 5.6.4 USB Device Setting.......................................................................................................... 50 5.7 Power Management Setup ................................................................................................... 51 5.7.1 HPET Feature.................................................................................................................. 52 5.7.2 Intel

Chapter: Document History

Advanced Digital Logic ADLS15PC page 5 0 Document History Version Changes 0.1 first pre-release 0.9 first complete version, todo: update photographs to G2 1.0 added SSD description, updated thermal specs, minor corrections 1.1 new photographs, updated contact details, minor changes 1.2 added pinout for RS-422/RS-485 COM soldering option, minor changes 1.3 minor changes 1.4 updated block diagram (ALC 885 EOL, 8GB SS
Advanced Digital Logic ADLS15PC 1 Introduction 1.1 Important Notes Please read this manual carefully before you start with the installation of this hardware device. To avoid Electrostatic Discharge (ESD) or transient voltage damage to the board, adhere to the following rules at all times: o You must discharge your body from electricity before touching this board. o Tools you use must be discharged from electrici

Description of Safety Symbols

Chapter: Introduction Advanced Digital Logic ADLS15PC page 7 1.5 Description of Safety Symbols The following safety symbols are used in this documentation. They are intended to alert the reader to the associated safety instructions. ACUTE RISK OF INJURY! If you do not adhere to the safety advise next to this symbol, there is immediate danger to life and health of individuals! RISK OF INJURY! If you do not adhere to the safet
Advanced Digital Logic ADLS15PC 2 Overview 2.1 Features The ADLS15PC is a highly complex PC/104-Plus board which incorporates complete motherboard functionality. Equipped with an Intel® Atom™ processor (Z510 or Z530), it can accommodate up to 2 GByte of RAM (DDR2-533) via SO-DIMM200. It also provides a 16-bit ISA bus (via PC/104, no DMA and memory transfer functions available) a PCI bus (via PC/104-Plus) and additional
Advanced Digital Logic ADLS15PC page 9 o LPT interface o Eight USB 2.0 interfaces (7x host, 1x host/device) o AWARD BIOS 6.10 o CRT connection o LCD connection via LVDS 18/24Bit o AC97/HDA compatible sound controller with SPDIF in and out o RTC with external CMOS battery o 5V single supply voltage o ISA bus via PC/104 (full 16bit support, no DMA and memory transfer functionality) o PCI bus via PC/104-Plus (max. four master device

Specifications and Documents

page 10 Advanced Digital Logic ADLS15PC 2.2 Specifications and Documents In making this manual and for further reading of technical documentation the following documents, specifications and web-pages were used and are recommended. § ISA Specification IEEE996P www.ieee.org § PC/104™ Specification Version 2.5 www.pc104.org § PC/104-Plus™ Specification Version 2.0 www.pc104.org § PCI Specification Version

ADL S15PC Chapter: Detailed Description

Advanced Digital Logic ADLS15PC page 11 3 Detailed Description 3.1 Power Supply The power supply of the hardware module is effected via the power connector. The board only requires an operating voltage of 5 volt ± 5%. 3.2 CPU The motherboard employs an Intel® Atom™ processor either with 1.1GHz or with 1.6GHz clock speed (Z510/Z530). These are single core CPUs which are optimized for low power consumption while
Advanced Digital Logic ADLS15PC 4 Connectors 4.1 Connector Map Please use the connector map below for quick reference. Only connectors on the component side are shown. For more information on each connector refer to the table below. Ref-No. Function Page P400 "IDE Interface" p. 29 U500* "Memory" p. 15 P800** "LAN" p. 27 P801 "Serial Interface COM1" p. 32 P802** "Audio" p. 28 P803 "Parallel Interface LPT"
Advanced Digital Logic ADLS15PC page 13 4.2 Power Supply The connector for the power supply is a standard IDC socket connector with a spacing of 2.54 mm. The board only requires an operating voltage of 5 volt ± 5%. 3.3V output to the PC/104-Plus bus is the only off-board supply available. Should additional voltages be needed for PC/104 expansion cards, these must be provided externally by connecting the respective pins (se
Advanced Digital Logic ADLS15PC 4.3 System The system connector, which has the main functions that are necessary to start the board, is provided via a standard IDC socket connector with a spacing of 2.54 mm. This connector supports the following interfaces: PS/2 keyboard, PS/2 mouse, speaker, external RTC- battery and reset of the board. NOTE For "Real Time Clock" an external battery (3.3V) must be connected. Connect "+"
Advanced Digital Logic ADLS15PC page 15 4.4 Memory There is one conventional SO-DIMM200 socket available to equip the board with memory (DDR2-533). It is located on the bottom side of the board. For mechanical reasons it is possible that particular memory modules cannot be employed. Please ask your sales representative for recommended memory modules. With currently available SO-DIMM modules a memory extension up to 2 GByte is pos
Advanced Digital Logic ADLS15PC Description Name Pin Name Description 2.5 volt supply 2.5V 45 46 2.5V 2.5 volt supply data strobe 2 DQS2 47 48 DQM2 data mask 2 data 18 DQ18 49 50 DQ22 data 22 ground GND 51 52 GND ground data 19 DQ19 53 54 DQ23 data 23 data 24 DQ24 55 56 DQ28 data 28 2.5 volt supply 2.5V 57 58 2.5V 2.5 volt supply data 25 DQ25 59 60 DQ29 data 29 data strobe 3 DQS3 61 62 DQM3 data mask 3 ground GND 63 64 GN

ADL Motherboard Owners Instructions: