Antari FT-50 Operation & User’s Manual

Safety Information Please read the following safety information carefully before operating the machine. This information includes important safeguards about installation, usage, and maintenance. Pay attention to all warning labels and instructions in this manual and printed on the machine. If you have questions about how to operate the machine safely, please contact your local Antari dealer for help. ․ Keep this device dry. ․ Al ...

․ Before transporting the machine, make sure the aerosols is removed ․ Fog fluid may present health risks if swallowed. Do not drink fog fluid. Store it securely. In case of eye contact or if fluid is swallowed, immediately look for medical advice. Unpacking and Inspection Immediately upon receiving the machine, carefully unpack the carton, check the content to ensure that all parts are present and have be ...

open space around the machine. Step 2: Check and cleared any foreign object in the threaded aerosol insert. Align aerosol valve with threaded insert and carefully turn clockwise to fix into positiion. Aerosol should be screwed in tightly to create an effective seal = Volume Control Knob Power Switch LED Indicator Breaker Power Input Ae ...

requirement for the machine refer to the label on the back of the machine. Always connect the machine to a protected circuit and ensure it is properly grounded to avoid risk of electrocution. Step 4: Turn on the machine and allow it to heat up. Heat up takes approximatly 7.5 mintues. Once the machine has reached operating temperature, the LED inidcator located in back pane ...

Machine. The machine is tested and calibrated with this aerosol to get the best output performance. Warranty will be void if any other type of aerosol is used, improper use of aerosol may lead to machine failure and malfunction. Service and Maintenance ․ Do not allow the machine to become contaminated. ․ Remove dust from air vents with air compressor, vacuum or a soft brush. ․ ...

230V = 8A 250V Technical Specifications Input voltage US 120V EU 230V UK 240V JP 100V Breaker 120V = 15A 250V 230V = 8A 250V Heater 1450W Warm-up time 7.5 min. (approx.) Fluid consumption 110 ml/min Compatible fluid Antari FLP aerosol Power connection IEC Dimension L 346 x W 152 x H 251 mm Dry weight 9.8 kg ...