Appro NVR-6030 Installation & Operation Manual

INSTALLATION & OPERATION MANUAL �VR-6030 ���������������������� ...

1. Product Features .......................................................................................................... 2 1.1 Product Introduction..................................................................................................................2 1.2 Product Features........................................................................................................................2 2. The Overview ............... ...

1.1 Product Introduction APPRO provides a 4-channel network video recorder for advanced network video monitoring. The NVR-6030 not only brings you dependable video monitoring but also is a lightweight, user-friendly, cost-effective, and easy-to-install device. The NVR-6030 is compatible with any video systems for home and office security. The NVR-6030 has one built-in e-SATA port for storage space and supports network video backup funct ...

2.1 The Flank Panel- Right Side 1 2 3 1. Power button. 2. Power & Network LED Indicators: LED Indicative Color Status Description Solid Light Booting/ Restart Power LED Red Light off While connected to LAN port Solid Light While connected to LAN port Blinking While LAN transferring data Network LED Green Light off Not connected to LAN 3. Reset button. Use the end of a paper clip or some other similar object to press and hold the Reset butto ...

The NVR provides an HDMI interface which can be connected to an HDMI monitor. 5. LAN (ETHERNET 10/100 Connector): This is a standard RJ-45 connector for 10/100 Mbps Ethernet networks. 2.3 The Flank Panel- Left Side 1 2 1. USB 2.0 Host x2: Supports mouse, flash disk, or HDD with external power. 2. DC Input: DC12V/ 3.0A (AC Adapter). Note Q: Can I use an external USB drive for recording? A: An external USB drive can't be used for recording ...

Before installing a hard disk drive (HDD), please make sure the power is disconnected from the NVR. A factory recommended HDD should be used for this installation. Tools Required: Screwdriver. 1. Remove the cover from the NVR. Then insert the hard disk along the slot until it is placed into the proper position. 2. Place the HDD on the mounting plate and fix it with 2 screws. 3. After having finished the installation, please repla ...

3.1 Connections 1. Connect the main monitor to the Main Monitor via VGA port or HDMI connector. 2. Connect one or more cameras to the LAN. 3. Connect a mouse to the USB port at the rear panel. 3.2 Basic Operations 3.2.1 Power on Connect the power supply then press the power button on the right side of the NVR. 3.2.2 Login the System After the program is started, a pop-up window will ...

This section shows you how to operate and manage the NVR. The system provides four operation modes: � The Live mode � The Playback mode � The Setup mode � The Camera Search mode Click the four buttons on the left hand side of the system tab to change the operation mode. 8 ...

The Live mode is composed of the following parts: 1. The operation modes. 2. The function keys. 3. Current Date & Time. 4. The system function buttons. 5. Camera List. 6. PTZ Control Panel: the ePTZ (electronic pan/tilt/zoom) capabilities enable users to move to a target region instantly for close-up shots by simply clicking on the video feeds on the screen rather than moving the camera physically. 7. E-Map: the E-Map pr ...

View as 2x2 The monitor layout provides the different pattern layouts, such as 1x1 pattern (1 viewer) or 2x2 pattern (4 viewers). Drag the specific cameras from the device list and drop in the viewers. Full Screen Click the Full Screen button, and the size of the pattern will be stretched to the full screen. Double click the stretched viewer, and the system will show the 2x2 pattern. To back to the original size, pl ...

setting on the PTZ control panel. Patrol The patrol paths are organized by a few preset points. Delete Preset Choose any one preset position and click this button to delete your choice. Set as Preset Click this button to set the preset position you have entered. 11 ...

Click to enter to the Playback mode. The Playback mode is composed of the following parts: 1. The Calendar: This allows you to search a recorded video stored in the HDD of the device. Select the Month/ Date/ Year you wish to search. The dates marked in red color indicate there are record videos on those days. 2. The Export Video Panel. 3. The Event List Panel and the USB Information Panel.. 4. The function keys. 5. ...

on / off. Every Viewer will display its connecting condition. Cue In Press the Cue In button to select where you would like the video export to begin. Cue Out Click the Cue Out button where you would like to stop the export. Export Remember to insert a USB flash memory into the USB port of the unit before backing up first. Once the Cue In/ Out points are selected, please click the Export ...

Click to enter to the Setup mode. The Setup mode is composed of the following pages: I. Network Setup – 01. Network Setup Function buttons Description Static IP Click to activate the function. When only one unit of the NVR is connected to LAN, you can freely assign an IP address for the NVR. When setting the DHCP item to off, the IP Address, Subnet Mask, Gateway and DNS may be manually edited. DNS (The Domain Name Sy ...

Function buttons Description DDNS Click to activate or deactivate the function. The DDNS (Dynamic Domain Name Server) will hold a DNS host name and synchronize the public IP address of the modem when it has been modified. The user name and password are required when using the DDNS service. DNS (The Domain Name System) is an Internet service that translates domain names into IP addresses (i.e. 192.168.0.20). The address can be ...

Select a camera on the Camera List for advanced settings. Click on the Audio and Video button to enter the Audio and video page to set the details of the cameras. Click on the Image button to enter the image-setting page. Function buttons Description Audio and Video Main/ Sub Profile Select the Profile number from 1-2. Video Format Choose the video format from “MJPEG”, “MPEG4” or“H.264”. Frame Rate Click on ...

The schedule setting will help the user to setup the schedules of actions, such as recording or alarm triggering. 1. Select a camera on the Camera List for advanced schedule settings. 2. Checkmark to activate the “Enable schedule recording”, the “Enable audio recording” or the “Enable automatic overwrite” functions on the Recording Settings column. 3. The Pre-record and Post-record time control how lon ...

Select to send the media files via the email when a trigger is activated. Set the details of the Email 1. Sender email address: The email address of the sender. 2. Recipient email address: The email address of the recipient. 3. Sender email address: Enter the email address of the sender. 4. Recipient email address: Enter the email address of the recipient. 5. Server address: Enter the domain or IP address of the emai ...