Argos Asha Assembly Instructions Manual
Text of Argos Asha Assembly Instructions Manual
If you need help or have damaged or missing parts, please visit www.argos-support.co.uk
or email: [email protected] (quoting your original order number)
Alternatively, call the Spares Helpline on: 0370 112 1928.
For any other queries please contact the Customer Helpline on: 0345 640 2020
Important - Please read these instructi
Safety and Care Advice
Important - Please read these instructions fully before starting assembly
• The recommended mattress size is 900mm x 1900mm.
• Minimum mattress height of 200mm to be used.
• WARNING! Do not place this child’s bed near heat
sources, windows and other furniture.
• WARNING! Do not use this child’s bed if any part is
broken,
Safety and Care Advice
Important - Please read these instructions fully before starting assembly
• Warning: This unit weighs
approximately 47kgs.
Please lift with care.
• Check you have all the
components and tools listed on
pages 2 and 3.
• Remove all fittings from the
plastic bags and separate them
into their groups.
• Keep children and animals
awa
Components - Panels
Please check you have all the panels listed below
If you need help or have damaged or missing parts, please visit www.argos-support.co.uk
or email: [email protected] (quoting your original order number)
Alternatively, call the Spares Helpline on: 0370 112 1928.
For any other queries please contact the Customer Helpline on: 0345 640 2
Please check you have all the fittings listed below
Note: The quantities below are the correct amount to complete the assembly. In some cases
more fittings may be supplied than are required.
Components - Fittings
If you need help or have damaged or missing parts, please visit www.argos-support.co.uk
or email: [email protected] (quoting your original ord
Prepare the 2 end
panels
Screw 2 metal dowels
into each od the 2 end
panels .
Note: Tighten the metal
dowels up fully against
the panels.
A
1
A
A
A
1
B
B
B
Prepare 1 of the back
brace panels
Insert 4 large locking
nuts into a back
brace .
Note: The arrow on the
lo
Prepare the 2 left
plinths
Insert a large locking
nut into each of the 2
left plinths .
Tap a wooden dowel
into each of the 2 left
plinths .
Step 5
B
B
C
Finished
front edge
Finished
front edge
B
5
C
5
5
x 2
x 2
7
Prepare the 2 right
plinths
Insert a large locking
nut into each of the 2
right plinths