ATN PS-22 Operator's Manual
Text of the manual
o p e r a t o r ’ s m a n u a l
Important Export Restrictions! Commodities,
products, technologies and services contained in
this manual are subject to one or more of the export
control laws and regulations of the U.S. Government
and they fall under the control jurisdiction of either the
US Department of State or the US BIS-Department
of Commerce. It is u
The information in this manual furnished for information use only, is subject to
change without notice, is not to be construed as a commitment by ATN Corp.
ATN Corp. assumes no responsibility or liability for any errors or inaccuracies
that may appear in this book.
© 2012 ATN Corp. All right reserved.
Register your product warranty online at
www.atncorp.com
• The ATN PS-22 is a precision optical instrument and must be han-
dled carefully at all times to prevent damage.
• Do not scratch the external lens surfaces or touch them with your
fingers.
• To protect the image intensifier, keep the lens cap on the objective
lens when the sight is not in use or when checked out in daylight
The image intensifier’s phosphor screen contains toxic materi-
als.
• If an image intensifier breaks, be extremely careful to avoid
inhaling the phosphor screen material. Do not allow the mate-
rial to come in contact with the mouth or open wounds on the
skin.
• If the phosphor screen material contacts your skin, wash it off
im
To avoid physical and equipment damage when using the
ATN PS-22, carefully read and understand the following safety
precautions.
• The equipment requires some night light (moonlight, starlight,
etc.) to operate. The level of performance depends upon the
level of light.
• Night light is reduced by passing cloud cover, while operati
TABLE OF CONTENTS
pg.
SAFETY SUMMARY
a
SECTION I. INTRODUCTION
1-1
1.1. General
1-2
1.1.1. Sight
1-2
1.1.2. Reports
1-2
1.1.3. Storage
1-2
1.1.4. Warranty
1-3
1.2. Description and Data
1-5
1.2.1. Description
1-5
1.2.2. PS-22 Standard Components
and Optional Equipment
1-8
SECTION II. OPERATING INSTRUCTIONS
2-1
2.1. Installation Procedures
2-2
2.1.1. Battery
SECTION III. MAINTENANCE INSTRUCTIONS
3-1
3.1. Preventive Maintenance Checks
and Services (PMCS)
3-2
3.1.1. Preventive Maintenance Checks and
Services Table
3-2
3.1.2. Inspection Criteria for Proper Image
Intensifier Operation
3-6
3.1.3. Flashing, Flickering, or Intermittent Operation
3-3
3.1.4. Cosmetic Blemishes
3-3
3.2. Troubleshooting
3-10
3.2.1. Gene