Bastl Instruments SoftPop Operation & User’s Manual

Text of the manual

SoftPop is a modular analog noise

creature. It is playful, stubborn, rowdy and maybe even a little bit wise. The heart of softPop is a wild tangle of feedback, chaos and an oddly familiar organic personality. There is a great amount of complexity in its simplicity and the open architecture enables you to explore all the distant places of its chaotic galaxy.

There are three ways to power softPop:

Wall adapter jack. 7–9 VDC Plugging in a cable will automatically disconnect the battery power. Micro USB jack. Power from your computer, power bank or any other USB-format power supply. Battery compartment (on the back). Takes 4 AA batteries. 10–20 hours run time. Rechargeable batteries are highly recommende

Cutoff level fader. Adjusts the

tone of the filter from high to low. Modulation fader. Applies modulation to the cutoff of VCF. The source of modulation is normalized (internally connected) from a mix of VCO0 + VCO1 . This signal can be partially overridden by patching a signal into the MOD socket in the patchbay. Feedback thumbwheel. Use this to incre

The pattern generator creates looping

sequences by recording the behavior of VCO0. These sequences control the pitch of VCO0 and are also available as a voltage source via the pattern generator OUT jack in the patchbay. This signal can be used to modulate various parameters of softPop or even external equipment via the A, B, C jack adapter

patterns, but for the most part, it

functions best as a random looping pattern source. QUANTIZER The quantizer converts the continuously variable pitch range of VCO0 to a stepped scale of chromatically tuned notes. Quantize button - Tap to activate or deactivate the quantizer. Quantize led - Indicates if the quantizer is on or off. *Tech notes* • The qu

PATCHBAY SoftPop PATCHB

SOCKET TO JACK ADAPTERS (A, B, C) Converts socket connections in the patchbay to 3.5 mm jacks for connecting with the outside world. Use to share audio signals, control voltages, and clocks with your modular synths, drum machine and beyond. They can also be used to take multiple sounds from the patchbay and output them as separate sig

LP (output) - Low Pass – filter output.

BP (output) - Band Pass – filter output. HP (output) - High Pass – filter output. VCO1 – Voltage Controlled Oscillator 1 MOD (input) - Modulation – pitch control input. Attenuate input signal with the modulation slider. Normalized to the VCO0 + VCO1 + external signal mix. Connect another signal to the socket

Other Recording Equipment Manuals