Bretford 35SD27 Assembly Instructions

Text of Bretford 35SD27 Assembly Instructions

35SD21 35SD25 35SD27

Connections Smart Deck Table Assembly Instructions PARTS LIST HARDWARE LIST Qty Part# Description 1 Wood Top and Upper Leg Assembly 2 022-2361 Right/Left Lower Legs 1** 010-3026 Lower Inner Bracket 010-4977 Lower Inner Bracket for MT Models **(2) for Model 35SD25 & 35SD27 1** 010-3027 Bottom Bracket **(2) for Model 35SD25 & 35SD27 1** 010-3028 Top Bracket **(2) for Model 35SD25 & 35SD27 1** 010-3030 Upper Outer Bracket 010-4979 Uppe

Position the bottom bracket (with notch) and the lower inner bracket to the bottom half of your pedestal

leg as shown. LOOSELY attach the brackets around the pedestal with bolts (CC) and nuts (DD). STEP 2 CC DD Position the top bracket and the upper inner bracket around the upper half of your pedestal as shown. LOOSELY attach together with bolts (CC) and nuts (DD). NOTE: These brackets can be mounted above or below the set screws depending on the adj

Position the upper outer bracket over the upper inner bracket as shown. LOOSELY attach

the brackets together with bolts (CC) and nuts (DD). Determine the correct height distance needed for your CPU and TIGHTEN THE TOP AND BOTTOM BRACKETS IN PLACE. Place (1) Velcro piece (EE) on the outer bracket as shown and also place (1) Velcro piece (FF) on your CPU. Then position the CPU into the holder and slide the outer brackets in place. TIGHTEN

Part # 031-6701

Rev. 03.17.10 CZ Remove the 6 screws shown in FIGURE 1. Detach the wood top and set aside. Attach your monitor as shown in FIGURE 2. Reattach the wood top. STEP 6 Remove the 6 screws and detach wood top FIGURE 1 FIGURE 2 Align monitor with holes and attach MOUNTING THE MONITOR Close lid about half way to access latch. To adjust the latch up or down, loosen or tighten these nuts. WHEN LOCK DOES NOT FULLY CATCH ON LATCH, ADJUSTMENTS SHO

Bretford Indoor Furnishing Owners Instructions: