Carrier KSACN0401AAA Installation Instructions Manual

7 Day Programmable Ductless Systems KSACN0401AAA (High Wall/Floor Console Models) KSACN0501AAA (Ducted/Cassette Models) INSTALLATION INSTRUCTIONS NOTE: Read the entire instruction manual before installing the unit. ...

PAGE SAFETY CONSIDERATIONS 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . COMPATIBILITY TABLES 5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . INSTALLATION ACCESSORY 6 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

Failure to follow this caution may result in equipment damage or improper operation. Excessive torque can break the flare nut depending on installation conditions. CAUTION ! EQUIPMENT DAMAGE HAZARD Failure to follow this warning could result in personal injury or death. Before beginning any modification or installation of this kit, ...

� This manual provides a detailed description of the precautions that the user should be mindful of during operation. � To ensure correct service of the wired controller, read this manual carefully before using the unit. � Keep this manual, after reading it, for future reference. NOTE: 1. Do not install t ...

HIGH WALL* FLOOR CONSOLE** 40MAQB09B--1 619PAQ009BBMA 40MHHQ09---1 40MHHC09---1 40MBFQ09---3 40MAQB12B--1 619PAQ012BBMA 40MHHQ12---1 40MHHC12---1 40MBFQ12---3 40MAQB09B--3 619PEQ009BBMA 40MHHQ09---3 40MHHC09---3 40MAQB12B--3 619PEQ012BBMA 40MHHQ12---3 40MHHC12---3 40MAQB18B--3 619PEQ018BBMA 40MH ...

1. Confirm the following required parts have been supplied (see Table 3). Table 3—Parts No. NAME QTY. REMARKS 1 Wired controller 1 2 Installation and owner's manual 1 3 Screws 3 M4X20 (for mounting on the wall) 4 Wall plugs 3 For mounting on the wall 5 Screws 2 M4X25 (for mounting on the switch box) ...

1. This manual provides the wired controller installation method. Refer to the wiring diagram in this installation manual to wire the wired controller with the indoor unit. 2. The wired controller works in a low voltage loop circuit. Do not connect directly to 208/230V and 460V. Do not wire this kind of wire into a ...

The connection cable CN101 Fig. 3 - Installation of KSACN0401AAA for High Wall Indoor Models 1. Install the Adapter Board and the Display Board on the High Wall (See the Appendix for instructions). 2. Connect the female joint of the wires group from the adapter board with the male ...

1. Insert a flat screwdriver into the slots in the lower part of the wire controller (2 places). 2. Remove the upper part of the wire controller (see Fig. 5). Slots Fig. 5 - Slots NOTE: The PCB is mounted in the upper part of the wired controller. Be careful not to damage the board with the screwdriver. ...

1. For surface mounting, fasten the back plate on the wall with the 3 screws (M4x20) and plugs (see Fig. 6). Back plate Screws (M4×20) Fig. 6 - Fasten Back Plate 2. For switch box mounting, fasten the back plate on the switch box with 2 screws (M4x25) and fasten it on the wall with 1 screw (M4x20) (see Fig. 7). Back ...