Chauvet Epix Drive 642 Quick Reference Manual

EN 2 About this Guide The ÉPIX Drive 642 Quick Reference Guide (QRG) has basic product information such as connection, mounting, menu options, and DMX values. Download the User Manual from www.chauvetprofessional.com for more details. Disclaimer The information and specifications contained in this QRG are subject to change without not ...

EN 3 Contact Outside the U.S., United Kingdom, Ireland, Mexico, or Benelux, contact your distributor to request support or return a product. Visit www.chauvetprofessional.com for contact information. What Is Included • ÉPIX™ Drive 642 • Warranty Card • Quick Reference Guide • Neutrik® powerCON® to Edison Plug Input Power C ...

EN 4 Product Overview Front View Mounting/ Safety Points Art-Net™/Kling-Net In/Out Power Output ÉPIX™ Strip 2.0 or ÉPIX™ Bar 2.0 or ÉPIX™ Tile 2.0 Output Power Input Side Views Top View ...

EN 5 Mounting The ÉPIX™ Drive 642 has four (4) mounting points (one on each corner) with 13 mm holes to which you can install screws and mount this product directly to almost any flat surface, truss, or other load bearing structure in any orientation. The product may also be installed with clamps for hanging on truss. You must suppl ...

EN 6 Mounting Instructions Mounting hardware is not included with the product. Using Mounting Clamps: 1. Attach the clamp to the mounting bracket. 2. Attach a safety cable to the product’s safety loop. 3. Attach the clamp to the desired structure or surface. 4. Attach a safety cable through the mounting points. Using Mounting Points: ...

EN 7 Signal Connections Do not use WAN port! Computer/Controller (running Kling-Net or Art-Net™ protocol) Router ÉPIX™ Drive 642 To other Kling-Net or Art-Net™ Devices ...

EN 8 Art-Net™ Connection Art-Net™ is an Ethernet protocol that uses TCP/IP that transfers large amount of DMX512 data using an etherCON® RJ45 connection over a large network. An Art-Net™ protocol document is available from www.chauvetprofessional.com. Art-Net™ is designed and copyrighted by Artistic Licence Holdings Ltd. This ...

EN 9 Connecting ÉPIX™ Products to the Power Supply The ÉPIX™ Drive 642 uses an RJ45 data connection to link all data ports. You can connect either 4 ÉPIX™ Strip 2.0 or 1 ÉPIX™ Bar 2.0 or 4 ÉPIX™ Tile 2.0 per output on the ÉPIX™ Drive 642. The following diagram illustrates how to assemble the data connections. Each por ...

EN 10 Power Linking The ÉPIX™ Drive 642 supports power linking. You can power link up to • Seven (7) ÉPIX™ Drive 642 products at 120 VAC; or • Ten (10) ÉPIX™ Drive 642 products at 108 VAC; or • Eleven (11) ÉPIX™ Drive 642 products at 230 VAC A power input cord is included with the ÉPIX™ Drive 642. A power linking c ...