Cisco 3G MicroCell Operation & User’s Manual

3/6/2009 5:43:20 PM ...

3/6/2009 5:43:24 PM ...

Welcome ......................................................................................................................................................................6 Getting Started ........ ...

1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with dry cloth. 7) Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8) Do not install near any heat sources such as ...

A label on this product indicates the correct power source for this product. Operate this product only from an electrical outlet with the voltage and frequency indicated on the product label. If you are uncertain of the type of power supply to your home or business, consult your service provider or your local power company. The AC inle ...

phones and devices within a home or small business. The MicroCell is secure and delivers maximum cellular signal strength within its coverage area – it’s like having your own mini cell tower in your home or office. Getting S ...

equipment is straight forward, but be sure to read the cabling instructions carefully before making connections. Note: Before starting, you can view AT&T’s online MicroCell demonstration at att.com/3GMicroCell. Step 1. Et ...

Place the MicroCell upright, near the modem. 1. Disconnect the Ethernet cable from the modem (see dotted line), while leaving the other end connected to the PC. 2. Reconnect the Ethernet cable to the black connector marked Computer on the MicroCell. 3. Find the yellow Ethernet cable that came with the MicroCell and co ...

Place the MicroCell upright, near the gateway. 1. Find the yellow Ethernet cable that came with the MicroCell and connect it between the yellow connector marked Ethernet on the Micro ...

Few households or small businesses have this type of setup. Do not set your MicroCell up this way unless you know that your modem has been configured in bridge mode with a PPPoE termination on the router. Place the MicroCell upright, near the modem and router. 1. Find the yellow Ethernet cable that cam ...