Cramer LS3500 Operating Instructions Manual
Text of Cramer LS3500 Operating Instructions Manual
FOLIAGE- and WASTE-
VACUUM-CLEANER
Operating Instructions
Design: 03
CRAMER-TECHNIK GmbH . Postfach 1269 . D-26762 Leer . Telefon 0491-6095-0 . Telefax 0491-6095-200 · e-mail: [email protected]
Contents:
1. Scope of Application
2. Description
3. Safety Instructions
4. Operation
5. Maintenance Instructions
6. Spare Parts
7. Troubleshooting
8. Technical Data
9. Spare Parts Drawing
10. Spare Parts List
Ri 02/18/01
You have purchased
the following mod
1. Scope of Application
(The digits in text correspond to the item num-
bers on spare part list.)
- This machine is approved for use as a foliage and
garden waste vacuum (by converting the machi-
ne into a foliage blower) as described in these
operating instructions.
- The machine must not be used for any other pur-
pose. The manufacturer shall not be liable for
damage resulting from improper use of the equip-
ment. In such cases the user shall bear sole r
completely stopped. The engine ignition lever
should be set to »0« position so that the engine
cannot be started accidentally. In addition, the
gas lever must be in »Stop« position.
13. Never leave the machine unattended while the
engine is running.
14. Never run the engine in closed rooms: Danger of
intoxication!
15. Do not place hands or feet under the suction
nozzle or near rotating parts.
16. The area to be vacuumed should be clear of sto-
nes, wir
the attached instructions of Honda.
All bearing points of the foliage vacuum have self-
lubricating ball bearings and do not have to be lubri-
cated.
Model LS 5000/LS 5000 H: check drive after a longer
period of working time (depending on the type of
ground the vac is used on). Loosen the four screws
holding the bottom plate to uncover the complete
driving mechanism (45/66). Wear may have loose-
ned the wheel driving chain (41/74). To adjust
distance again
10. Spare Parts List
LS 3500
LS 5000
LS 5000 H
Item
Description
No. of drawing
Art.-No.
Art.-No.
Art.-No.
1
Rubber strip
670.01-01-006
99.5.7000
99.5.7000
99.5.7000
2
Clamping strip
670.01-01-005
99.5.7001
99.5.7001
99.5.7001
3
Suction nozzle LS
99.5.7002
99.5.7002
4
Star-grip nut
M10x25
99.5.7078
99.5.7078
99.5.7078
5
Contact switch
99.5.7004
99.5.7004
6
Hexagon bolt
DIN 933-M10x25
99.5.7005
99.5.7005
99.5.7005
7
Outlet connecting piece
99.5.7006
99.5.700