D-Link DCS-3010 Quick Install Manual

process for your new D-Link Network Camera. DCS-3010 Documentation also available on CD and via the D-Link Website Quick Install Guide HD PoE Network Camera Quick Install Guide ...

2 ENGLISH DCS-3010 Quick Install Guide This installation guide provides basic instructions for installing the DCS-3010 Network Camera on your network. For additional information about how to use the camera, please refer to the User Manual which is available on the CD included in this package or from the D-Link support webs ...

3 ENGLISH 2. Hardware Overview Rear Panel Ethernet (PoE) RJ-45 connector for Ethernet which can also be used to power the camera using PoE Microphone Port Use to Connect an external microphone Reset Press and hold this button for 10 seconds to reset the camera to factory default settings Speaker Port Use to connect an exte ...

4 ENGLISH microSD Card Slot Local microSD card for storing recorded images and video Side Panel Front Panel Built-in Mic Internal microphone ...

5 ENGLISH DC-Iris Connector Connector for DC auto iris lens Right Panel Bottom Panel Mounting Nut 1/4' x 20 nut for affixing camera to mounting bracket ...

6 ENGLISH 3. Hardware Installation Basic Connection (without PoE) Connect the camera to your switch or router via Ethernet cable. Connect the supplied power cable from the camera to a power outlet. Connection Using a PoE Switch If using a PoE switch, connect the network camera via Ethernet cable. PoE will transmit both pow ...

7 ENGLISH 4. Configuration with Wizard Click Setup Wizard to begin the installation. Insert the DCS-3010 CD into your computer's CD-ROM drive to begin the installation. If the Autorun function on your computer is disabled, or if the D-Link Launcher fails to start automatically, click Start > Run. Type D:\autorun.exe, where ...

8 ENGLISH Click on the D-Link Setup Wizard SE icon that was created in your Windows Start menu. Start > D-Link > Setup Wizard SE Take a moment to confirm your settings and click Restart. Select DHCP if your camera obtains an IP address automatically when it boots up. Select Static IP if the camera will use the same IP addr ...

9 ENGLISH Click on the D-Link Setup Wizard SE icon that was created in your Windows Start menu. Start > D-Link > Setup Wizard SE Viewing Camera via Web Browser This section shows your camera’s live video. You can select your video profile and view or operate the camera. For additional information about web configuration, ...