D-Link DGS-1008P Quick Installation Manual

Warning: Using a power adapter with a different voltage rating will damage and void the warranty of this product. • DGS-1008P 8-Port Gigabit Unmanaged Desktop Switch • Power Adapter (54 V, 1.67 A) • Power Cable • Mounting Kit � ...

Please follow the steps below to set up the switch: 1. Install the DGS-1008P in a cool and dry place. Refer to the Technical Specifications for the acceptable operating temperature and humidity ranges. 2. Install the switch in a site free from strong electromagnetic source, vibration, dust, ...

A. POWER Plug the AC power cord into a free outlet or surge protector, then plug the other end of the DC power jack into the power port of the DGS-1008P. The Power LED will illuminate confirming that the device has powered up successfully. B. PoE PORTS (PORTS 1 - 4) PoE Ports 1 to 4 support 802.3a ...

switch, connection, or attached devices. LED Color Status Description Power Green Solid light Power on Off Power off Link/Act/Speed Green Solid light Connection to a 1000 Mbps Ethernet device. Blinking The port is receiving ...

1. WHAT SHOULD I DO IF THE POWER LED DOES NOT LIGHT UP? - Check if the power adapter is connected properly to the outlet or surge protector and the back of the device. - Ensure that the on/off switch is in the "on" position. 2. WHAT SHOULD I DO IF A CONNECTED DEVICE IS NOT DETECTED? - En ...

Copyright ©2016 All rights reserved. D-Link and the D-Link logo are registered trademarks of D-Link Corporation or its subsidiaries. Other trademarks are the property of their respective owners. Product specifications, size and shape are subject to change without notice, and actual product appearance may differ from ...