DAPAudio GIG-1000CFX Manual 

Ordercode: D2286 MANUAL ENGLISH ...

Warning ............................................................................................................................................................................... 2 Safety Instructions ........................................................................................................... ...

that all parts are present and have been received in good condition. Notify the dealer immediately and retain packing material for inspection if any parts appear damaged from shipping or the carton ...

connections with the mains with particular caution! • Never remove warning or informative labels from the unit. • Never use anything to cover the ground contact. • Never leave any cables lying around. • Do not insert objects in ...

01) Remove the screws on the bottomside. 02) Firmly push the side covers sidewards to separate them from the GIG-1000CFX. 03) Secure the 19-inch mounting rack (D2296) in position with the 4 included screws. Connection with the mains ...

Package must be clearly labeled with a Return Authorization Number (RMA number). Products returned without an RMA number will be refused. Highlite will not accept the returned goods or any responsibility. Call Hig ...

Features • Ultra-low noise discrete MIC Preamps with +48V Phantom Power. • Input voltage: 100-240V, 60/50Hz • Power consumption: 1000W • 4 MIC Input Channels with XLR and balanced Line Input, Insert I/O and Compressor control. • Low Cut for each MIC Input. • 2 Stereo Input Channels with mono ...

MIC INPUT JACKS (CHs 1 to 7/8) The balanced XLR input connects to microphones, DI boxes and multicores. LINE INPUT JACKS (CHs 1 to 4) This is a ¼" jack connector which connects to line-level signal sources (for example, keyboards, CD players and wireless microphone receivers). The input is balanced (TRS con ...

kHz. You can boost or cut the bands up to 15 dB. When in center position (0 dB), the equalizer has a flat response. MID The HIGH MID control adjusts the mid frequency range. This is a peak filter which boosts and cuts the frequencies centered at 2 ...

mixdown. The volume level can be adjusted using the LEVEL fader. MAIN Each channel is equipped with a MAIN switch, pressing this button will send the signal to the MAIN MIX bus. LEVEL The channel fader adjusts the level of th ...