Dell PowerVault MD3000i Getting Started

Text of the manual

FILE LOCATION: J:\DL\DL102196\DTP\UW791fc1.fm

DELL CONFIDENTIAL – PRELIMINARY 4/30/10 – FOR PROOF ONLY Current template as of 4/26/2007 Model AMP01 Getting Started With Your System Začínáme se systémem Guide de mise en route Erste Schritte mit dem System Τα πρώτα βήματα με το σύστημά σας Rozpoczęcie pracy z systemem На

FILE LOCATION: J:\DL\DL102196\DTP\UW791et1.fm

DELL CONFIDENTIAL – PRELIMINARY 4/23/10 – FOR PROOF ONLY Model AMP01 Getting Started With Your System

FILE LOCATION: J:\DL\DL102196\DTP\UW791et1.fm

Notes, Notices, and Cautions NOTE: A NOTE indicates important information that helps you make better use of your computer. NOTICE: A NOTICE indicates either potential damage to hardware or loss of data and tells you how to avoid the problem. CAUTION: A CAUTION indicates a potential for property damage, person

Getting Started With Your System

3 System Features This section describes the major hardware and software features of your system. It also provides information about other documents you may need when setting up your system and how to obtain technical assistance. Performance Features • 667-MHz Intel® XScale® processor • 512-MB high-speed data cache memo

Getting Started With Your System

Manageability and Serviceability Features • Efficient rack-mount designed storage system • Hot-pluggable drives • Four sensors for monitoring ambient temperatures • Over-temperature shutdown protection capability • Configuration and monitoring via the MD Storage Manager software Supported Operating Systems Your sy

Getting Started With Your System

5 • CDs included with your system provide documentation and tools for installing, configuring, and managing your system. • The Dell PowerVault MD Systems Support Matrix at support.dell.com provides compatibility information, including servers, operating systems, controllers, software, and hardware configurations. • Upda

Getting Started With Your System

Install the Rails and System in a Rack Install the rails and system in the rack once you have read the "Safety Instructions" located in the rack installation documentation for your system. See your rack installation documentation for instructions on installing your system in a rack.

Getting Started With Your System

7 Connect the Power Cables and Power Cord Retention Bracket Connect both power cables to the power supply/cooling fan modules. Attach the power cord retention bracket to the power supply loop by affixing the back clasp of the bracket to the top of the loop and the middle clasp to the vertical middle of the loop. Attach the sy

Getting Started With Your System

Plug the other end of the power cables into a grounded electrical outlet or a separate power source such as an uninterruptible power supply (UPS) or a power distribution unit (PDU). Cable the RAID controller modules according to the instructions provided in the Hardware Owner’s Manual.

Other Speaker System Manuals