DMT 101602 Manual 

Highlite International B.V. – Vestastraat 2 – 6468 EX – Kerkrade – the Netherlands Ordercode: 101602 MANUAL ENGLISH ...

Table of contents Warning ............................................................................................................................................................................... 2 Unpacking Instructions ........................................................................................... ...

Warning Unpacking Instructions Immediately upon receiving this product, carefully unpack the carton and check the contents to ensure that all parts are present, and have been received in good condition. Notify the dealer immediately and retain packing material for inspection if any parts appear damaged from shipping ...

IMPORTANT: The manufacturer will not accept liability for any resulting damages caused by the non-observance of this manual or any unauthorized modification to the system.  Never let the power cord come into contact with other cables! Handle the power cord and all connections with the mains with particular caution ...

Connection with the mains Connect the device to the mains with the power-plug. Always pay attention, that the right color cable is connected to the right place. International EU Cable UK Cable US Cable Pin L BROWN RED YELLOW/COPPER FASE N BLUE BLACK SILVER NULL YELLOW/GREEN GREEN GREEN EARTH Make sure that the device ...

Description of the device Features The SB-804 is a professional sender box from DMT.  Input voltage: 85-264V AC, 50/60Hz  Power consumption: 25W  Patch LED screens without using a computer and LED Studio  2x 802 Sendercard included  Video input: 2x DVI-D + HDMI  Use a digital video (DVI or HDMI) inp ...

Backside Fig. 02 07) U-port OUT to LED screen (Default port, always use U-port, but for large setups use D-port) 08) D-port OUT to LED screen Connect the LED screen to one of these ports using a standard CAT5 or CAT6 cable with or without the Ethercon connector. 09) Audio Input 10) DVI video IN 11) HDMI IN Does NOT ...

Installation Remove all packing materials from the SB-804. Check that all foam and plastic padding is removed. Connect all cables. Do not supply power before the whole system is set up and connected properly. Always disconnect from electric mains power supply before cleaning or servicing. Damages caused by non-observ ...

Main Menu Options 1. Quick Connection 01) Turn the control (02) to select QUICK CONNECTION, then press control (02) to enter the menu. The available 6 options are:  SENDING CARD TYPE  SENDING CARD No.  OUTPUT FORMAT  QUICK CONNECTION  CASCADE  BRIGHTNESS 02) Turn the control (02) to select one of th ...